Getrag 440/446 parts.

[jackhammer]

Originally Posted by Gatecrasher

I've got 2 6-speeds torn apart right now. I was planning to do exactly what you're doing so we can have a bearing catalog. I'll have some numbers to compare to yours shortly.

Cool.........

[doctorstupid]

Originally Posted by MitsubishiSpecialties

I guess the only ones i'm unsure of are the VCU front and the counter shaft rear. I read the counter uses a 30208 & 30209, but in my pile of used bearings i don't have a 30208 but i do have a 30207. I'm assuming it came from the counter shaft rear, because the counter is the only part that uses bearings that start with "302..."

The intermediary (aka counter) shaft rear was without a doubt 30208 in the last 6 speed I was working on here, I know this because I replaced it

Are you working on a 5 speed? This could very easily explain any discrepencies in our numbers. Sometime this month I'll be picking through my 6 speed giving it some TLC and resetting preload throughout, in doing so I will have removed all the races and will happily record al of the numbers if for nothing more than comparison

Gatecrasher, I still need 1-2 and 3-4 stiffer syncrho springs to throw in while I have my tranny open, what do I need to do to get the from you?

[jackhammer]

Yep, i'm working on a 5 speed. The 30207a is definitly for the counter shaft rear. I tested it yesterday.

So the only one i'm lacking is the VCU front, these are all correct for the 5speed

- Fr Diff 32008 & 32009
- Fr Diff Idler sleeve 32009 (qty 2)
- Counter shaft 30207 & 30209
- VCU Rear 32009

[Gatecrasher]

Doc, use the email link and get me your info. I'll get them sent out. The 1/2 springs are $5 each and the 3/4 springs are about $1 each. Don't ask me why the 1/2 springs are so expensive. My cost on them is $4.60. I just round it up to $5 for convenience.

I've got all the 6-speed bearings cataloged. I'll post them tomorrow. I don't feel like going out to the garage to get my notebook right now

[doctorstupid]

Originally Posted by Gatecrasher

Doc, use the email link and get me your info. I'll get them sent out. The 1/2 springs are $5 each and the 3/4 springs are about $1 each. Don't ask me why the 1/2 springs are so expensive. My cost on them is $4.60. I just round it up to $5 for convenience.

I've got all the 6-speed bearings cataloged. I'll post them tomorrow. I don't feel like going out to the garage to get my notebook right now

Will do

[jackhammer]

Anyone know the number for the front VCU bearing??

I don't want to have to make 2 1hr trips to the press, i want to have all the parts on hand the first time.

[KORMEX]

Originally Posted by MitsubishiSpecialties

Anyone know the number for the front VCU bearing??

I don't want to have to make 2 1hr trips to the press, i want to have all the parts on hand the first time.

Which one ?

[jackhammer]

#32010, right next to the vcu housing gear

5 speed

[KORMEX]

Originally Posted by MitsubishiSpecialties

#32010, right next to the vcu housing gear

5 speed

Yes thats a 32010
Actually that drawing is wrong on all 32209 it should be 32009 the same with 32208 it should be 32008.

[jackhammer]

OK, heres the complete 5 speed taper bearing list

- Fr Diff 32008 & 32009
- Fr Diff Idler sleeve 32009 (qty 2)
- Counter shaft 30207 & 30209
- VCU Rear 32009
- VCU front 32010

Please add that to post 1