Getrag 440/446 parts. - Page 43 - 3000GT/Stealth International Message Center

38 Cigarette · 11-03-2004, 06:37 PM

Quote:

Originally Posted by Bigmac01

I got a quick question for anyone who knows. It might have been answered but are these tranny parts still being made at all by getrag or are we just diminishing our supply and will eventually run out.

Good question.

I "believe" parts are still being manufactured. Earlier ( much earlier

) in this thread, someone mentioned that he was getting parts in Europe with no problem.

Mac3KGT · 11-03-2004, 07:28 PM

Quote:

Originally Posted by 38 Cigarette

Good question.

I "believe" parts are still being manufactured. Earlier ( much earlier

) in this thread, someone mentioned that he was getting parts in Europe with no problem.

I know that we can get the parts (not easily

) but if they are in fact not manufacturing the parts anymore and we are just diminshing our "stash", we need to do something!! Bret.....anyone.

MilkyClr69 · 11-03-2004, 08:14 PM

Hey howard, i sent you an email, just making sure you got it. If you could PM me back or email me at Spasm102@netscape.net, i'd really appreciate it.

Thanks
Tim

Gatecrasher · 11-03-2004, 08:14 PM

I ordered parts from CRS last week. They said that they had plenty for now, and they'd be more or less stocked until their contract ran out. Then it was anyone's guess.

Now, less than 7 days after I talked to them, they say there's a shortage of outer rings? Hmm...

SpeedFreakSteve · 11-04-2004, 10:29 AM

Quote:

Originally Posted by Gatecrasher

I ordered parts from CRS last week. They said that they had plenty for now, and they'd be more or less stocked until their contract ran out. Then it was anyone's guess.

Now, less than 7 days after I talked to them, they say there's a shortage of outer rings? Hmm...

I ordered a couple sets of 3rd gear synchro rings from them 2 weeks ago. I've called them about 2-3 times a day to check on the order and I've only been getting voicemail. They haven't been calling me back when I leave a message either.

Do they have a fax number, or email?

Does anyone else sell these at all? I need these like ASAP.

maddog · 11-04-2004, 11:41 AM

i talked to them today. they finally wrote me a check for the wrong gear they sold me. nothing big just timely fashion.

try callin in 30 min intervals thats how i have to do it.

razzor7 · 11-04-2004, 02:27 PM

Guys, I know this thread has become absolutely huge and I haven't read past post 200 (I've been taking this in for hours!

), but if our transmission parts stash is getting low, I'd like to help. Among other goodies, I own a small CNC milling machine, and wouldn't mind doing small production for the 3s community. I'm currently in the middle of a 9B to 13T turbo conversion project, but once that's done, I'm sure we could do some synchros and other little tranny goodies, if you guys are interested. And I'd offer competetive pricing with respect to CRS. Feel free to send me a PM or something, just so that I can gauge interest.

Regards,
- Dmitry

BLACK94TT · 11-04-2004, 04:09 PM

Quote:

Originally Posted by razzor7

Guys, I know this thread has become absolutely huge and I haven't read past post 200 (I've been taking this in for hours!

), but if our transmission parts stash is getting low, I'd like to help. Among other goodies, I own a small CNC milling machine, and wouldn't mind doing small production for the 3s community. I'm currently in the middle of a 9B to 13T turbo conversion project, but once that's done, I'm sure we could do some synchros and other little tranny goodies, if you guys are interested. And I'd offer competetive pricing with respect to CRS. Feel free to send me a PM or something, just so that I can gauge interest.

Regards,
- Dmitry

Very nice!

Bret Brinkmann · 11-05-2004, 10:27 AM

These parts (all of them) are still being produced. Contact Kormex, CRS, and Mentor Mitsu for you needs. Between the three of them you can get all the parts you need. I have updated the first post of this thread. The first post also has all the contact info you will need.

TypicalStateGuy · 11-08-2004, 03:46 PM

hey brett, i sent you an email about getting a 6spd diagram. Do you have one with torque specs, etc?

11-03-2004, 08:14 PM	#423 (permalink)
MilkyClr69 Forum Member Join Date: Jul 2003 Location: Pittsburgh Trader Rating: (11)	Re: Getrag 440/446 parts. Hey howard, i sent you an email, just making sure you got it. If you could PM me back or email me at Spasm102@netscape.net, i'd really appreciate it. Thanks Tim __________________ 96 SL MagnaFlow Catback, K&N Intake, 18 x 8 ADR Sterling, 245 40 18 Ecsta Supra, Limo/15% window tint, Cross-drilled and slotted rotors, 12" sealed IDMAX w/ 1000 Watt Hifonics amp. Infinity & JBL speakers powered by Hinfonics amp, Alpine 7893. TT engine/tranny swap Fixing a few problems and she'll be back on the road!

11-03-2004, 08:14 PM	#424 (permalink)
Gatecrasher The Chaosbringer Join Date: Aug 1999 Drives: 81 Fiat Panda Trader Rating: (7)	Re: Getrag 440/446 parts. I ordered parts from CRS last week. They said that they had plenty for now, and they'd be more or less stocked until their contract ran out. Then it was anyone's guess. Now, less than 7 days after I talked to them, they say there's a shortage of outer rings? Hmm...

11-04-2004, 11:41 AM	#426 (permalink)
maddog The New Super Pimp Join Date: May 2002 Location: chicago suburbs / IA Drives: FASTER THAN VIPERS Trader Rating: (7)	Re: Getrag 440/446 parts. i talked to them today. they finally wrote me a check for the wrong gear they sold me. nothing big just timely fashion. try callin in 30 min intervals thats how i have to do it. __________________ 93 Sandstone VR4 11.66 @ 117.48mph with Maddog Performance Engineering 13T's This weeks specials: CUSTOM RUBBER INTERCOOLER PIPING AT 50% OFF!!! 28 HOUR ENGINE REBUILD ONLY $700

11-04-2004, 02:27 PM	#427 (permalink)
razzor7 Expert CNC Machinist Join Date: Dec 2003 Location: Apple Valley, MN Drives: '92 Burgundy VR-4 Trader Rating: (1)	Re: Getrag 440/446 parts. Guys, I know this thread has become absolutely huge and I haven't read past post 200 (I've been taking this in for hours! ), but if our transmission parts stash is getting low, I'd like to help. Among other goodies, I own a small CNC milling machine, and wouldn't mind doing small production for the 3s community. I'm currently in the middle of a 9B to 13T turbo conversion project, but once that's done, I'm sure we could do some synchros and other little tranny goodies, if you guys are interested. And I'd offer competetive pricing with respect to CRS. Feel free to send me a PM or something, just so that I can gauge interest. Regards, - Dmitry

11-05-2004, 10:27 AM	#429 (permalink)
Bret Brinkmann Gear Head Join Date: Mar 2001 Location: Charlotte NC Drives: Rear wheels only... Trader Rating: (4)	Re: Getrag 440/446 parts. These parts (all of them) are still being produced. Contact Kormex, CRS, and Mentor Mitsu for you needs. Between the three of them you can get all the parts you need. I have updated the first post of this thread. The first post also has all the contact info you will need. __________________ When asked what the best thing to come out of Italy is, most Italians will tell you Ferrari.... But if you ask me it was Super Mario Brothers. 250 RWHP If you want the exploded views of both 5 and 6 speeds or pics e-mail me at SavagTiger@AOL.com. 94 VR-4 Panama Green Tan Interior RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

11-08-2004, 03:46 PM	#430 (permalink)
TypicalStateGuy Carolina DSM Board Member Join Date: Dec 2002 Location: Birmingham, AL Drives: 03' IS300 Trader Rating: (23)	Re: Getrag 440/446 parts. hey brett, i sent you an email about getting a 6spd diagram. Do you have one with torque specs, etc? __________________ -David 1995 Stealth RT/TT 12.067@115mph....SOLD!! 2003 IS300 Sport Design - Stick