Getrag 440/446 parts.

[RobBeck]

FYI here are the seal prices from mitsupartsdirect.com:

O/S seal - MR110306 $18.62
Left Axle - MB837028 $22.99
Right Axle - MB837029 $18.83


Rob

[bertz]

shift fork inside the trans that moves the synchro collar (slyder) from 1st-neutral-2nd

i need this part bad, just called mentor and they said to email them and they could get back to me but it would be a few days

does anyone know anyone that has spare parts? lol

i tryed CRS and i am unable to get ahold of anyone
Kormex was extremely helpful to me just with a few posts in a thread i made earlier but he recommened i check out this thread. And buddy if your readin this you were right... it was the broken shift fork! unfortunately lol, i was reall hopin it was just the pin that fell out

anyway fellas should i just keep trying CRS? or is there anyone else i can get ahold of? I'd do anything to get the part here by this weekend.

[Mentor Mitsu]

Originally Posted by bertz

shift fork inside the trans that moves the synchro collar (slyder) from 1st-neutral-2nd

i need this part bad, just called mentor and they said to email them and they could get back to me but it would be a few days

does anyone know anyone that has spare parts? lol

i tryed CRS and i am unable to get ahold of anyone
Kormex was extremely helpful to me just with a few posts in a thread i made earlier but he recommened i check out this thread. And buddy if your readin this you were right... it was the broken shift fork! unfortunately lol, i was reall hopin it was just the pin that fell out

anyway fellas should i just keep trying CRS? or is there anyone else i can get ahold of? I'd do anything to get the part here by this weekend.

Did you receive my email?
The lead time is still roughly 30 days with air freight included.
Wish I could be of more help but thats what Mitsu has available.

Thanks,
Howard

[Mentor Mitsu]

Originally Posted by bertz

shift fork inside the trans that moves the synchro collar (slyder) from 1st-neutral-2nd

i need this part bad, just called mentor and they said to email them and they could get back to me but it would be a few days

does anyone know anyone that has spare parts? lol

i tryed CRS and i am unable to get ahold of anyone
Kormex was extremely helpful to me just with a few posts in a thread i made earlier but he recommened i check out this thread. And buddy if your readin this you were right... it was the broken shift fork! unfortunately lol, i was reall hopin it was just the pin that fell out

anyway fellas should i just keep trying CRS? or is there anyone else i can get ahold of? I'd do anything to get the part here by this weekend.

Also to try and speed things up for everyone:

1st: Ask for me (I'm not on individual commision but I have been working on this and know the channels to follow).

2nd: If I'm not available ask for extension # 3622 and leave a voicemail and I'll get started on your request & reply ASAP.

Thanks,
Howard

[Bret Brinkmann]

I know CRS sells those seals for around $5 each last I checked.

As for the fork, if you want it ASAP your best bet would be to keep trying to get up with John at CRS and have him ship it COD by what ever shipping you want. I ordered a 1/2 fork for my 6 speed a while ago and it was about $150. It also came with the rod attatched.

Howard, if I ever get enough time I'll give you a call one of these days I swear!

[RobBeck]

Bret you are right CRS is like $15 for all 3 of them so I am going to go ahead and get the seals from them.

Thanks for the heads up...

Rob

Originally Posted by Bret Brinkmann

I know CRS sells those seals for around $5 each last I checked.

As for the fork, if you want it ASAP your best bet would be to keep trying to get up with John at CRS and have him ship it COD by what ever shipping you want. I ordered a 1/2 fork for my 6 speed a while ago and it was about $150. It also came with the rod attatched.

Howard, if I ever get enough time I'll give you a call one of these days I swear!

[bertz]

yea i got ahold of bill at crs... very helpful, to overnight it... it would be here monday but he set up a saterday delivery

i ordered today and it will be here tomarow... was 50 to ship it but i needed it!
THANKS CFS

and howard thank you for the quick response i just needed it a little faster buddy

[Mentor Mitsu]

Originally Posted by Bret Brinkmann

I know CRS sells those seals for around $5 each last I checked.

As for the fork, if you want it ASAP your best bet would be to keep trying to get up with John at CRS and have him ship it COD by what ever shipping you want. I ordered a 1/2 fork for my 6 speed a while ago and it was about $150. It also came with the rod attatched.

Howard, if I ever get enough time I'll give you a call one of these days I swear!

Bret,

I look forward to it.
I have some questions that you probably would be best to ask.
Also FWIW- I appreciate the referrals on ordering parts and I hope that you don't mind my referring people to you for Tech help (as you are the only Technician that I know of that has split the cases on these trannies).

I saw the RWD conversion in your Sig.
How much fun is it anyway...?
I would guess it would have to be a pretty wild ride (oversteer Rocks)

Regards,
Howard

[Mentor Mitsu]

Originally Posted by bertz

yea i got ahold of bill at crs... very helpful, to overnight it... it would be here monday but he set up a saterday delivery

i ordered today and it will be here tomarow... was 50 to ship it but i needed it!
THANKS CFS

and howard thank you for the quick response i just needed it a little faster buddy

bertz,

My pleasure...I just wish that I had better news.
I'm not worried about the sale. If I can help great...but if someone can do it faster I'm pleased.

It is all about the cars. Think of me as a stop-gap measure.
If know one can come through quickly then I'll make things happen though it takes time.

Thanks,
Howard

[Lucky31337]

Howard recently helped me out with an input shaft seal/bearing. He overnighted to me and was very helpful!

Thanks howard!