Need help (flex-lite fan wiring) - 3000GT/Stealth International Message Center

Stealthmode93 · 04-22-2008, 10:20 AM

As the title says I need help wiring in my flex-lite fans to the stock wiring harness. I want them to run with the temp control like the stock ones did. If anyone has done this could you explain how you did it?

Sean3S · 04-22-2008, 10:40 AM

Best bet would be to get a fan controller, you can get one for pretty cheap and it uses a temp probe to turn on at a set temperature.

Stealthmode93 · 04-24-2008, 10:27 AM

Is there any way that I can just wire them in tho the stock radiator fan and ac fan harnesses without buying any extra controllers? That way I can still use the stock sensors in the bottom of the radiator.

gambino · 04-29-2008, 07:34 AM

This should work:
Wiring Flex-a-lite fans how to?

For the condenser fan I used the blue and blue/black for power.

SPYDERTT · 05-24-2008, 09:06 PM

Just got mine done. Looks like this. Cut the wires off my old fans and soldered them to my new fans , also using the factory resistor. It's beer break , then we'll see if they fit.

Stealthmode93 · 06-03-2008, 10:17 AM

Thanks, guys I'll try that tonight.

04-22-2008, 10:20 AM	#1 (permalink)
Stealthmode93 Stealthmode93 Join Date: Apr 2005 Location: Maryland Drives: Stealth Trader Rating: (0)	Need help (flex-lite fan wiring) As the title says I need help wiring in my flex-lite fans to the stock wiring harness. I want them to run with the temp control like the stock ones did. If anyone has done this could you explain how you did it? __________________ STEALTHMODE93

04-22-2008, 10:40 AM	#2 (permalink)
Sean3S Verified Asian Join Date: Aug 2001 Location: Sugar Land, TX Drives: 94 TT Trader Rating: (36)	Re: Need help (flex-lite fan wiring) Best bet would be to get a fan controller, you can get one for pretty cheap and it uses a temp probe to turn on at a set temperature. __________________ '94 RT/TT 13T's \| PTE FMIC - PPE Pipes \| 560's \| Supra FP w/ 8ga Hotwire \| MAF-T 1.37 & LT1 Blow-Through \| E-Manage Blue w/ Boomslang Harness \| HKS DLI \| Stillen Downpipe \| Gutted Rear Pre-cat \| Borla Catback \| Tial BOV \| AEM FPR & Rob Beck Adapter \| DejonTool Intake Pipes \| PWR Radiator w/ IPS Pipes \| FAL Fans \| MP Motor Mounts \| 99 Lash Adjusters \| Clevite 77 Rod & Main Bearings \| Leatherseats.com Dk. Graphite w/ Red Center Seats \| Sparco Flash 5 Black w/ Red Alcantara \| Spec Stg. 2 Clutch & 3SX Clutch Line \| 3SX Crank Pulley \| Bob's SS Shifter & All Solid Bushings \| NGK Coppers & MSD Wires \| eK2 EGR Blockoffs \| eK2 Fuel Line Loop \| PST 1 Pc. CFDS \| Volk LE37T \| Falken FK452 \| Megan Racing Coilovers \| Adj. Rear Control Arms \| Slotted Rotors w/ Hawk HPS Pads \| GReddy Profec B \| AEM UEGO WB \| GReddy PWH Boost, EGT, GReddy OP, FP, Temp \| Hybrid Logger \| McColluch 5300K HIDs \| Shaved '99 Bumper & Turns \| PRM Style Hood 295.7 AWHP / 310.3 TQ @ 1 Bar - BPU @ TX04 Collecting Dust - Setrab Oil Cooler, Snow Stage 2 Meth, Brake Lines Some Day - ABS Delete, Ducting WTB - ek2 Harness Cover (above the fuel rails)

04-24-2008, 10:27 AM	#3 (permalink)
Stealthmode93 Stealthmode93 Join Date: Apr 2005 Location: Maryland Drives: Stealth Trader Rating: (0)	Re: Need help (flex-lite fan wiring) Is there any way that I can just wire them in tho the stock radiator fan and ac fan harnesses without buying any extra controllers? That way I can still use the stock sensors in the bottom of the radiator.

04-29-2008, 07:34 AM	#4 (permalink)
gambino Mr. Self Destruct Join Date: Mar 2002 Location: Maryland Trader Rating: (5)	Re: Need help (flex-lite fan wiring) This should work: Wiring Flex-a-lite fans how to? For the condenser fan I used the blue and blue/black for power. __________________ Jacob 97 VR-4 DR-1000s, AEM EMS [ 2003 Ninja 500R ] [ 93 VR-4 - Sold ] [ 99 GS-T - Sold ] If an injury has to be done to a man it should be so severe that his vengeance need not be feared. - Niccolo Machiavelli

06-03-2008, 10:17 AM	#6 (permalink)
Stealthmode93 Stealthmode93 Join Date: Apr 2005 Location: Maryland Drives: Stealth Trader Rating: (0)	Re: Need help (flex-lite fan wiring) Thanks, guys I'll try that tonight.

Sponsored Links
3000GT/Stealth International Message Center Advertisement