Engine Bay PICS (Best Thread) - Page 26 - 3000GT/Stealth International Message Center

Storm Strike · 11-04-2006, 06:17 PM

I was thinking more along the lines of 'Engine by Fischer Price'. But it's certainly eye-catching. And looks better than the pansy pastel colors nelson used :P

xwire · 11-04-2006, 06:59 PM

I like the contrast of all the colors, look good, make sure to post when it is done....

MMM RED · 11-04-2006, 08:05 PM

Quote:

Originally Posted by scotty66

still in bits but you get the idea

TOO "cartoonish" for me.
Just my .02

pyun · 11-04-2006, 09:22 PM

^hey RED, how is your vaccuum plating holding up? Darkgreenvr4 (whatever his name is) said that your started to flake off so "he has found a better solution"...

is it true with the flaking with the guys you used?

bslade · 11-04-2006, 09:38 PM

MMRED sold his car and the kid who bought it 'totalled' it

We are looking for the car so we can canabolize the engine bay!

MMM RED · 11-04-2006, 09:48 PM

Quote:

Originally Posted by pyun

^hey RED, how is your vaccuum plating holding up? Darkgreenvr4 (whatever his name is) said that your started to flake off so "he has found a better solution"...

is it true with the flaking with the guys you used?

Never started to flake in 2 1/2 yrs. and when I sold it it was "virgin". Hey Bob I heard the Battery exploded and ruined the engine bay. If the Timing belt covers are still O.K., talk to Force Fed (Geoff) and make a deal.
BTW who is this Darkgreen guy. He never saw my engine bay

Maybe he was just Green with envy

...Jay

pyun · 11-04-2006, 10:22 PM

Quote:

Originally Posted by MMM RED

Never started to flake in 2 1/2 yrs. and when I sold it it was "virgin". Hey Bob I heard the Battery exploded and ruined the engine bay. If the Timing belt covers are still O.K., talk to Force Fed (Geoff) and make a deal.
BTW who is this Darkgreen guy. He never saw my engine bay

Maybe he was just Green with envy

...Jay

http://www.3si.org/forum/showthread....chrome+plastic

check post #7 too

MMM RED · 11-04-2006, 10:37 PM

Quote:

Originally Posted by pyun

http://www.3si.org/forum/showthread....chrome+plastic

check post #7 too

I checked out that thread. Would like to make a comment but the thread is closed

I think the guy is full of

LP_Stealth · 07-23-2008, 01:59 PM

Bump so we can see all the new goody's

badass3000 · 07-23-2008, 03:12 PM

11-04-2006, 06:17 PM	#251 (permalink)
Storm Strike Forum Member Join Date: May 2002 Location: PA Trader Rating: (8)	Re: Engine Bay PICS (Best Thread) I was thinking more along the lines of 'Engine by Fischer Price'. But it's certainly eye-catching. And looks better than the pansy pastel colors nelson used :P __________________ '92 Stealth RT/TT, Sandstorm, 125K miles Currently installed: E-MBC, SS brake lines, Motul 600 BF, FN01R-C rims, ATR DP, test pipe, and exhaust, EK2Mfg EGR blockoff plates, MAFT-Pro, S-ITC, Dejon Tool intake runners, JIC FTL-A2 struts, PST CFDS, Tial BOV, MSD 8.5mm plug wires, Accelerated Motorsports catch can, Ebay FMIC, Evo 560's, IPO dual feed fuel lines, Greddy P/W/H EGT gauge, IPO battery relocation, Optima red top, PWR radiator, DSM shifter bushings, custom WW fluid tank, Saner F/R swaybars, PLX WB O2 setup, SCE StopTech ST-40 332x33 front brake upgrade & 300mm rear rotors, SCE tender springs, SCE caster/camber plates, Titan Bending f header, 15G turbos,forged crank, Crower rods, Weisco pistons, DR Stage 2 heads, TRS seats, 5 pnt harnesses.

11-04-2006, 06:59 PM	#252 (permalink)
xwire BUILDING CRAZY 3S's Join Date: Sep 2000 Location: My Garage Drives: several VR4's Trader Rating: (23)	Re: Engine Bay PICS (Best Thread) I like the contrast of all the colors, look good, make sure to post when it is done....

11-04-2006, 09:22 PM	#254 (permalink)
pyun "The Fisherman" Join Date: Dec 2002 Location: Bergen County/Philly Drives: around scaring birds Trader Rating: (75)	Re: Engine Bay PICS (Best Thread) ^hey RED, how is your vaccuum plating holding up? Darkgreenvr4 (whatever his name is) said that your started to flake off so "he has found a better solution"... is it true with the flaking with the guys you used? __________________

11-04-2006, 09:38 PM	#255 (permalink)
bslade Wax on - Wax off Join Date: Jun 2002 Location: Langley BC Canada Drives: 93 R/T - Beauty Blue Trader Rating: (1)	Re: Engine Bay PICS (Best Thread) MMRED sold his car and the kid who bought it 'totalled' it We are looking for the car so we can canabolize the engine bay! __________________ 1993 Stealth R/T Single Turbo Click here for more pics Mods: - Chromed timing belt covers,polished plenum, valve covers, 'Stealth R/T' spark plug plate, Blue engine dress-up. KYB GR-2shocks & Eiback Pro-Kit Springs, Addco Rear Swaybar. Alpine MP3 CD, PAC SWI-X, Audiobahn 300W Amp, JBL 1000W Sub, 3SI Floormats. Chromed factory wheels, FIAMM Horn Mod, Snake-Eyes, cross-drilled rotors, axis pads, and Dual Exhaust from a 3Kgt. Odometer = 324,000Km! Last edited by bslade : 11-04-2006 at 09:43 PM.

07-23-2008, 01:59 PM	#259 (permalink)
LP_Stealth Forum Member Join Date: Dec 2004 Location: BC Canada Drives: 95 Stealth TT Trader Rating: (1)	Re: Engine Bay PICS (Best Thread) Bump so we can see all the new goody's __________________ Ken Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you make it through the wall.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

07-23-2008, 03:12 PM	#260 (permalink)
badass3000 Wanted: Traction Problems Join Date: Nov 2002 Location: Jacksonville, Fl Drives: 18 Y.O. "badass" VR4 Trader Rating: (21)	Re: Engine Bay PICS (Best Thread) __________________ ++++++++++JUNE 2007 RIDE OF THE MONTH+++++++++++ Slideshow1..........Slideshow2..........My Photobucket..........My ImageStation.........MOD LIST Questions about the silver car?.....Rear message board info.....Turbo oil cap info.....nicest ass