-= Ultimate Emanage Thread =-

[Dj_Frost]

Originally Posted by Fourdoor

I ordered my Emanage ultimate with the boomslang harness including the knock and water sub harness, along with the greddy MAP sensor and ultimate map sensor harness. I also have the Inovate LC-1 on order, and was wondering when I saw the phrase "if you have a wide band, get the A/F harness".... is that a harness from Greddy you need, or does it come with the LC-1???

My last question: I noticed the posts about the Greddy injector adaptor 3 to get ride of the check engine light when running the boomslang harness... but when I look it up, it says that the Greddy injector adaptor 4 is for the V-6 GTO (GTO = VR-4 correct?) and that the adaptor 3 is for the in-line 4 from the EVO.... So what do I really need there?

Keith

A/F Harness does not come with the LC-1, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Optional Parts:
3) Then look for # E-manage Ultimate Air/Fuel input Harness #15900912 ONLY $25* or this one # E-manage Ultimate Air/Fuel input Harness "SUBSTITUTE" - #15900543 ONLY $20* (which you need to modify a bit)

Greddy injector adapter, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Special Adaptors:
3) Then look for # GReddy e-manage Ultimate injector adapter #3 (6 cylinders) - #15901507 ONLY $55*

[Dj_Frost]

Anyone know how to change my boomslang cable from Knock/Air to Water/Air ? I want to log coolant temps..

[Fourdoor]

Originally Posted by Dj_Frost

A/F Harness does not come with the LC-1, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Optional Parts:
3) Then look for # E-manage Ultimate Air/Fuel input Harness #15900912 ONLY $25* or this one # E-manage Ultimate Air/Fuel input Harness "SUBSTITUTE" - #15900543 ONLY $20* (which you need to modify a bit)

Greddy injector adapter, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Special Adaptors:
3) Then look for # GReddy e-manage Ultimate injector adapter #3 (6 cylinders) - #15901507 ONLY $55*

I order the parts just now, thanks for your help! I want to be able to install everything at one shot without any problems

Keith

[undertaker]

Quick question: If I were to use the boom slang harness that goes straight to stage 3 (for ease of install, not because I want/need stage 3) and DO NOT have the injector adapter #3 because they are impossible to find....

My CEL will be on (I dont care), but will there be additional issues? Will the car still run well? Can I still achieve a decent tune?

[Gray Haze]

Originally Posted by undertaker

Quick question: If I were to use the boom slang harness that goes straight to stage 3 (for ease of install, not because I want/need stage 3) and DO NOT have the injector adapter #3 because they are impossible to find....

My CEL will be on (I dont care), but will there be additional issues? Will the car still run well? Can I still achieve a decent tune?

you have to have the injector adapter, otherwise the EUC goes into a limp home mode.

[Dj_Frost]

Originally Posted by undertaker

Quick question: If I were to use the boom slang harness that goes straight to stage 3 (for ease of install, not because I want/need stage 3) and DO NOT have the injector adapter #3 because they are impossible to find....

My CEL will be on (I dont care), but will there be additional issues? Will the car still run well? Can I still achieve a decent tune?

They are not impossible to find? Here you go: http://www.mohdparts.com/emanage/index.html

[gtr35]

After reading all 998 posts, this is the first clear and concise post that lists the hardware requirements for this setup. Thank you!

I think it would be very helpful (especially for beginners like me) to list what hardware (recommend brand name, part #, vendor, URL, etc.) is needed for each stage and feature mentioned by OP in the 1st post.

For example, if one is using stock MAS, then the GReddy pressure sensor and pressure sensor harness are not needed, right?

Lastly, could someone repost that Java app written by BlackStealth and that Excel VBA program written by reg22? Those links are 2 years old and don't work anymore.


Who's going to be the lucky guy to break the 1000 posts count?

Originally Posted by Dj_Frost

A/F Harness does not come with the LC-1, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Optional Parts:
3) Then look for # E-manage Ultimate Air/Fuel input Harness #15900912 ONLY $25* or this one # E-manage Ultimate Air/Fuel input Harness "SUBSTITUTE" - #15900543 ONLY $20* (which you need to modify a bit)

Greddy injector adapter, you need this:

1) Go to http://www.mohdparts.com/emanage/index.html
2) Scroll down to the EMU parts and look for E-manage Ultimate Special Adaptors:
3) Then look for # GReddy e-manage Ultimate injector adapter #3 (6 cylinders) - #15901507 ONLY $55*

Originally Posted by Fourdoor

I ordered my Emanage ultimate with the boomslang harness including the knock and water sub harness, along with the greddy MAP sensor and ultimate map sensor harness. I also have the Inovate LC-1 on order, and was wondering when I saw the phrase "if you have a wide band, get the A/F harness".... is that a harness from Greddy you need, or does it come with the LC-1???

My last question: I noticed the posts about the Greddy injector adaptor 3 to get ride of the check engine light when running the boomslang harness... but when I look it up, it says that the Greddy injector adaptor 4 is for the V-6 GTO (GTO = VR-4 correct?) and that the adaptor 3 is for the in-line 4 from the EVO.... So what do I really need there?

Keith

[BlackStealth]

Originally Posted by gtr35

For example, if one is using stock MAS, then the GReddy pressure sensor and pressure sensor harness are not needed, right?

Not needed, but the pressure sensor can make things a bit easier for tuning.

Originally Posted by gtr35

Lastly, could someone repost that Java app written by BlackStealth and that Excel VBA program written by reg22? Those links are 2 years old and don't work anymore.

Those programs are no longer needed as you can use the greddy firmware/software (v2.00) to accomplish the same thing.

[Man]

I have aem wb02 guage/controller. It has a blue serial wire that I wanted to use in conjunction with a stereo style plug to attach to the EMU. Has anyone done this. I wanted to do this to open an option port to for launch control while using speed density.

I Dont know the polarity of the serial port so I dont know how to set up the plug. Nor do I know if I need to ground the plug like I would if I just used an option port.

[BlackStealth]

Serial output is completely different from an analog 0-5Volt output, and it's the latter what you need to hook up to the EMU.