---===The Official MAFT-Pro Thread===--- - Page 83 - 3000GT/Stealth International Message Center

Highboosted · 02-23-2006, 09:47 PM

Is that a Bailey BOV in your avatar?

Blue94VR4inNM · 02-24-2006, 01:26 PM

Quote:

Originally Posted by Highboosted

Is that a Bailey BOV in your avatar?

No, it's a Forge BOV.

DriveFast99 · 02-24-2006, 04:15 PM

so how do i open and load that new ve table into my car? i have no idea how to use the computer and what not witht the pro, and when i tried to open up the new ve table it wont allow me to, so i need help. im not a big computer guru so im clueless here.

TurboBob · 02-24-2006, 05:02 PM

Hope these help

Loading a new Bin

Logging with Tunerpro

Quick Vr4 · 02-24-2006, 07:13 PM

those vids helped a lot. Can you make some more of how to go in and edit all the settings? OK i have 550's with a hotwired walbro in my car right now. I have my mainscale at -30 only. I also have to add about 7% of fuel down in low load and in mid i believe i take out a little bit. I also noticed my car's lean idleing willl be fixed for a bit. Then after a little time the ecu starts to lean it back out. How do i get around this dilema? Does the ecu ever stop trying to adjust the fuel?

Barefoot · 02-24-2006, 07:21 PM

is that what a turbobob sounds like?! not what i was expecting

anyways, pretty informative.. now if only that method for datalogging actually worked..

(hopefully the problem i had was fixed in one of the updates.. my car has been down for a month and it still running all software that came with it)

TurboBob · 02-24-2006, 07:47 PM

yup, that was me.........

what were you expecting.......? My avatar is not really a picture of me......

I will try to make some editing vids, and register the vid software to get rid of the banner.

Bob

TurboBob · 02-24-2006, 07:48 PM

Quote:

Originally Posted by Quick Vr4

......Does the ecu ever stop trying to adjust the fuel?

Not as long as the O2 sensors are connected.

Quick Vr4 · 02-24-2006, 08:05 PM

crap. so what is everyone doing who is running open turbo in speed density mode. I mean about the PCV system. how is yours hooked up? are you just running breathers?

Barefoot · 02-24-2006, 08:07 PM

Quote:

Originally Posted by Quick Vr4

crap. so what is everyone doing who is running open turbo in speed density mode. I mean about the PCV system. how is yours hooked up? are you just running breathers?

stock, but i had the air intake pipes still hooked up.. that is a good question though, i havent thought about that yet..

02-23-2006, 09:47 PM	#821 (permalink)
Highboosted king of ghetto Join Date: May 2004 Location: St. Louis Drives: '94 Stealth Turbo Trader Rating: (29)	Re: ---===The Official MAFT-Pro Thread===--- Is that a Bailey BOV in your avatar? __________________ pıdnʇs 'ɹǝʌo ǝɯ dılɟ Official member of the "I upgraded everything in my car and now it's slower than stock" club.

02-24-2006, 04:15 PM	#823 (permalink)
DriveFast99 I bet you didn't know! Join Date: Jun 2003 Trader Rating: (7)	Re: ---===The Official MAFT-Pro Thread===--- so how do i open and load that new ve table into my car? i have no idea how to use the computer and what not witht the pro, and when i tried to open up the new ve table it wont allow me to, so i need help. im not a big computer guru so im clueless here.

02-24-2006, 05:02 PM	#824 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (17)	Re: ---===The Official MAFT-Pro Thread===--- Hope these help Loading a new Bin Logging with Tunerpro __________________ Need a datalogger? Check out the Scanmaster 3 PM me about ECU mods for 8000+ RPM rev limits !!!!!!!! Stock = 7300 RPM Stage 1 = 8060 RPM Stage 2 = 8200 RPM Stage 3 = 8400 RPM Stage 4 = 8800 RPM (By request only) 1991 Stealth RT/TT, Grooms Shortblock, 13G's. My Stealth is for sale, 65000 miles, runs perfectly. $6,500 (a bargain)

02-24-2006, 07:13 PM	#825 (permalink)
Quick Vr4 Forum Member Join Date: Oct 2002 Location: Southern California Drives: 91 3000gt VR4 Trader Rating: (11)	Re: ---===The Official MAFT-Pro Thread===--- those vids helped a lot. Can you make some more of how to go in and edit all the settings? OK i have 550's with a hotwired walbro in my car right now. I have my mainscale at -30 only. I also have to add about 7% of fuel down in low load and in mid i believe i take out a little bit. I also noticed my car's lean idleing willl be fixed for a bit. Then after a little time the ecu starts to lean it back out. How do i get around this dilema? Does the ecu ever stop trying to adjust the fuel? __________________ R.I.P 20g VR4

02-24-2006, 07:21 PM	#826 (permalink)
Barefoot Racing Join Date: Jan 2003 Location: Ga Tech Drives: 92R/T - converted ;) Trader Rating: (31)	Re: ---===The Official MAFT-Pro Thread===--- is that what a turbobob sounds like?! not what i was expecting anyways, pretty informative.. now if only that method for datalogging actually worked.. (hopefully the problem i had was fixed in one of the updates.. my car has been down for a month and it still running all software that came with it) __________________ 92 Dodge Stealth R/T AWD/TT (TD05) converted ( 11.894 @ 120.56 - 18 psi -> Video )

Sponsored Links
3000GT/Stealth International Message Center Advertisement

02-24-2006, 07:47 PM	#827 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (17)	Re: ---===The Official MAFT-Pro Thread===--- yup, that was me......... what were you expecting.......? My avatar is not really a picture of me...... I will try to make some editing vids, and register the vid software to get rid of the banner. Bob

02-24-2006, 08:05 PM	#829 (permalink)
Quick Vr4 Forum Member Join Date: Oct 2002 Location: Southern California Drives: 91 3000gt VR4 Trader Rating: (11)	Re: ---===The Official MAFT-Pro Thread===--- crap. so what is everyone doing who is running open turbo in speed density mode. I mean about the PCV system. how is yours hooked up? are you just running breathers?

LinkBacks (?) LinkBack to this Thread: http://www.3si.org/forum/f103/official-maft-pro-thread-290438/
Posted By	For	Type	Date
HOW TO INSTALL MAFTPRO ON A 91-99 3000GT VR4/91-96 STEALTH TT	This thread	Refback	04-13-2008 01:45 AM