---===The Official MAFT-Pro Thread===---

[TurboBob]

Originally Posted by RobBeck

Ok how can I get it Tpro4200.ads cause my boost isnt going up to more than 3.09psi on the Tpro4002.ads..... (3.09psi on the pro compared to 22-23psi on my boost gauge/3500rpm).

Another thing are you sure the conversion for the voltages to AFR are right for the AEM WBO2? My display is erroring out (meaning the AFR is sub 11.0:1) but the Pro is telling me I have a smooth 11.29:1 AFR across the band at WOT. (AFR Tracking is disabled, main correction at -38).

Rob

The ads file is in the zip file here:

Translator Pro 4.20 files (Tunerpro and documentation)

Does the display match otherwise? A friend has that same unit, and his works fine normally, but errors at 11.0

How did you wire the Orange and purple wires?

Bob

[TurboBob]

email sent

[TurboBob]

Originally Posted by Rustang Cobra

wow it was cold this morning

my MT on my maftpro showed 20F which is what weather.com is telling me too

my car started and ran well except the display was very slow to respond to any inputs, i'm gonna keep watching it to make sure i dont hit a temperature limit at which it'll stop responding

LCD's get slow when cold.

The laws of physics suck sometimes.......

Bob

[RobBeck]

Bob thanks I think your attachment will work!

Rob

[RobBeck]

Does anyone have an actual log including the Map sensor boost reading they can email me?

Thanks,
Rob

[Barefoot]

Originally Posted by RobBeck

Does anyone have an actual log including the Map sensor boost reading they can email me?

Thanks,
Rob

i did have one, but i lost it on with the hard drive failure, havent been able to log since...

now when i try to log, i will say recording xx samples, then i push stop, type something in. but when i try to play it, where is says comments i get something like this .. ٱ∆ڤס .. in the comment box and it plays between 0/1 to 1/1 over and over, which is worthless, any help here?

i reinstalled, using all tpro4002.xxx and using default record file. and everything else works fine except this..

[Barefoot]

i take that back, i found a file, whats your email?

[RobBeck]

pm sent. Thanks.

[Barefoot]

just though, might as well host it for anyone who wants to see it..

hope its the csv file you want, here you go..

http://www.prism.gatech.edu/~gtg529y/3si/log.csv
hope you like how crappy my tune is

[RobBeck]

can you go ahead and send me your adl file... that is VERY hard to read haha..

Let me know any session you had which was a long pull (ie. 2-4th gear WOT)

Thanks,
Rob