---===The Official MAFT-Pro Thread===--- - Page 183 - 3000GT/Stealth International Message Center

msassoon · 12-27-2006, 02:17 AM

So, my TPS and MAP settings for AFR Tracking should be WOT settings? And the PT Tracking should be adjusting fueling at Idle, Cruise and in Lean situations?

Quick Vr4 · 12-27-2006, 10:15 AM

two step coming soon?

runner4053 · 12-27-2006, 10:21 AM

While I'm trying to update the translator using the .bat files, It says to hold the two left buttons. It never detects the translator. What do I do? None of the other .bat files work.

TurboBob · 12-27-2006, 08:03 PM

you need to have the computer at the "waiting for translator" point, and then power up the translator with the buttons held. (Later versions of the translator don't need the buttons held)

What laptop, port, cable do you have?

Bob

runner4053 · 12-29-2006, 12:04 PM

Quote:

Originally Posted by TurboBob

you need to have the computer at the "waiting for translator" point, and then power up the translator with the buttons held. (Later versions of the translator don't need the buttons held)

What laptop, port, cable do you have?

Bob

I'm pretty sure I have the computer at the right point. The computer screen actually says, "hold down the left two buttons and power up the translator." I'm using an HP T2400 laptop and the cable is this one. .

TurboBob · 12-29-2006, 12:31 PM

probably a port setting or driver issue.

Do this:
http://www.bailey-eng.com/instructio...ttingports.avi

and look to see what the port is set to.......

Bob

runner4053 · 12-29-2006, 04:50 PM

If i swith around my USB ports, I see 5, 6, 7, or 8

TurboBob · 12-29-2006, 05:31 PM

set it in the COM 5 USB slot, and use the COM5 load program.

We have had trouble with the Belkin brand, and perhaps that one is the same inside....

The Pro logs at 19200 baud, but updates at 9600, so if the adapter cannot do 9600 baud properly, or cannot replicate a break signal (some can't) then you may not be able to use that to update your Pro.

Can you try another computer? If not, I can update it for you.

(do you have the latest driver installed?)

Bob

runner4053 · 12-29-2006, 09:11 PM

Quote:

Originally Posted by TurboBob

set it in the COM 5 USB slot, and use the COM5 load program.

We have had trouble with the Belkin brand, and perhaps that one is the same inside....

The Pro logs at 19200 baud, but updates at 9600, so if the adapter cannot do 9600 baud properly, or cannot replicate a break signal (some can't) then you may not be able to use that to update your Pro.

Can you try another computer? If not, I can update it for you.

(do you have the latest driver installed?)

Bob

I tried another comp a little while ago with no success. I used my old comp that I used to update it last time. This adapter is new ( lost the old one ) , so I think it's the adapter. I've tried it in everyport. What do I need to look for in an adapter when I go to buy one?

Highboosted · 12-29-2006, 10:26 PM

This one works:

http://sewelldirect.com/usbtoserial.asp

12-27-2006, 02:17 AM	#1821 (permalink)
msassoon Forum Member Join Date: May 2004 Location: Berkshire, England Drives: GTO SC ATX Trader Rating: (1)	Re: ---===The Official MAFT-Pro Thread===--- So, my TPS and MAP settings for AFR Tracking should be WOT settings? And the PT Tracking should be adjusting fueling at Idle, Cruise and in Lean situations? __________________ Black 1991 Ripp Modds Supercharged GTO DOHC MAFT Pro running speed density. Erebuni front bumper and side skirts Racetech Exhaust. EK2 shorties and 3SX Downpipe Custom transmission and oil cooler Import Precision VLS doors 18" Chrome VR4 wheels and Chassis Dynamics Lowering springs '99 Sail panels Lightened crank pulley EK2 fuel rail adapter. Underbonnet bling Too much custom stuff to mention

12-27-2006, 10:15 AM	#1822 (permalink)
Quick Vr4 Forum Member Join Date: Oct 2002 Location: Southern California Drives: 91 3000gt VR4 Trader Rating: (11)	Re: ---===The Official MAFT-Pro Thread===--- two step coming soon? __________________ R.I.P 20g VR4

12-27-2006, 10:21 AM	#1823 (permalink)
runner4053 the car whisperer Join Date: May 2003 Location: Univ. of Illinois Drives: 96 RT/TT Trader Rating: (4)	Re: ---===The Official MAFT-Pro Thread===--- While I'm trying to update the translator using the .bat files, It says to hold the two left buttons. It never detects the translator. What do I do? None of the other .bat files work. __________________ 96 RT/TT Currently missing an engine. major performance mods: DR650's, MAFT-PRO speed density, 720 cc, supra pump with hotwire, Fuellab FPR, ported heads, 1mm over intake and 1 mm over iconel exhaust valves. spec 3+ clutch, fidenza flywheel, 2 piece Al driveshaft, Supercar baffled oil pan, relocated battery, custom exhaust, reinforced bellhousing, 3sx poly motor mounts, intrax with GR-2, lots' of little things. Waiting to get put in---> DR1000s with .48AR and stage 2 blade

12-27-2006, 08:03 PM	#1824 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (14)	Re: ---===The Official MAFT-Pro Thread===--- you need to have the computer at the "waiting for translator" point, and then power up the translator with the buttons held. (Later versions of the translator don't need the buttons held) What laptop, port, cable do you have? Bob __________________ Need a datalogger? Check out the Scanmaster 3 PM me about ECU mods for 8000+ RPM rev limits !!!!!!!! Stock = 7300 RPM Stage 1 = 8060 RPM Stage 2 = 8200 RPM Stage 3 = 8400 RPM Stage 4 = 8800 RPM (By request only) 1991 Stealth RT/TT, Grooms Shortblock, 13G's, Translator Pro, www.maftpro.com My Stealth is for sale, 65000 miles, runs perfectly. $8K

12-29-2006, 12:31 PM	#1826 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (14)	Re: ---===The Official MAFT-Pro Thread===--- probably a port setting or driver issue. Do this: http://www.bailey-eng.com/instructio...ttingports.avi and look to see what the port is set to....... Bob

Sponsored Links
3000GT/Stealth International Message Center Advertisement

12-29-2006, 04:50 PM	#1827 (permalink)
runner4053 the car whisperer Join Date: May 2003 Location: Univ. of Illinois Drives: 96 RT/TT Trader Rating: (4)	Re: ---===The Official MAFT-Pro Thread===--- If i swith around my USB ports, I see 5, 6, 7, or 8

12-29-2006, 05:31 PM	#1828 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (14)	Re: ---===The Official MAFT-Pro Thread===--- set it in the COM 5 USB slot, and use the COM5 load program. We have had trouble with the Belkin brand, and perhaps that one is the same inside.... The Pro logs at 19200 baud, but updates at 9600, so if the adapter cannot do 9600 baud properly, or cannot replicate a break signal (some can't) then you may not be able to use that to update your Pro. Can you try another computer? If not, I can update it for you. (do you have the latest driver installed?) Bob

12-29-2006, 10:26 PM	#1830 (permalink)
Highboosted king of ghetto Join Date: May 2004 Location: St. Louis Drives: '94 Stealth Turbo Trader Rating: (28)	Re: ---===The Official MAFT-Pro Thread===--- This one works: http://sewelldirect.com/usbtoserial.asp __________________ pıdnʇs 'ɹǝʌo ǝɯ dılɟ Tech inspector: "What's that for?" Me: "It makes me win". Tech inspector: "How?" Me: "By confusing people who try and copy me".

LinkBacks (?) LinkBack to this Thread: http://www.3si.org/forum/f103/official-maft-pro-thread-290438/
Posted By	For	Type	Date
HOW TO INSTALL MAFTPRO ON A 91-99 3000GT VR4/91-96 STEALTH TT	This thread	Refback	04-13-2008 12:45 AM