Installing WB02 - 3000GT/Stealth International Message Center

TrAb · 07-03-2006, 09:21 AM

I am just getting around to installing my AEM WB02 and was wondering if anybody knew of a writeup on the install or could help me. Im not sure where to put the signal wires (blue and white)...Thanks

TrAb · 07-03-2006, 09:52 AM

HELP

junglesmacks · 07-03-2006, 10:01 AM

If you aren't connecting the wb02 to anything just yet, you don't need to do anything with 'em. Those would be for some type of external output ie. datalogger/MAFT/AEM input. Not neccesary for regular use.

TrAb · 07-03-2006, 03:41 PM

Im datalogging...

jj3kgt · 07-03-2006, 04:52 PM

What ecu are you running? OBDI or II or hybrid? What are you using to datalog? This will all determine how you hook it up.

TrAb · 07-03-2006, 06:03 PM

Im using stock 93 TT ecu...Datalogger is from shiver OC palm logger

jj3kgt · 07-03-2006, 08:02 PM

There should be an open pin on the diagnostic connector you can hook the 5 volt single from the AEM to and get the new program from shiver.

TrAb · 07-03-2006, 08:25 PM

Open pin? What exactly does that mean? And do i not need to hook up the blue wire?

skunkworks · 07-03-2006, 08:32 PM

oh really? I am pretty sure you need to hook it into the egrt plug under the hood. or the corrisponding pins at the ecu.

1G Electronic Boost Data Logging

Quote:

Originally Posted by jj3kgt

There should be an open pin on the diagnostic connector you can hook the 5 volt single from the AEM to and get the new program from shiver.

jj3kgt · 07-03-2006, 08:38 PM

By "open" I meant a port that you do not need in datalogging that you can either tap into or bypass in order to send the WB signal through.

Ask shiver directly as he will know much more about this then I will.

07-03-2006, 09:21 AM	#1 (permalink)
TrAb * * Join Date: Nov 2004 Location: Athens, Ga Drives: A Ice Cream Truck... Trader Rating: (23)	Installing WB02 I am just getting around to installing my AEM WB02 and was wondering if anybody knew of a writeup on the install or could help me. Im not sure where to put the signal wires (blue and white)...Thanks __________________

07-03-2006, 09:52 AM	#2 (permalink)
TrAb * * Join Date: Nov 2004 Location: Athens, Ga Drives: A Ice Cream Truck... Trader Rating: (23)	Re: Installing WB02 HELP

07-03-2006, 10:01 AM	#3 (permalink)
junglesmacks gettin' buck wild yo Join Date: Mar 2005 Location: Lake Mary, FL Drives: with a grin! Trader Rating: (3)	Re: Installing WB02 If you aren't connecting the wb02 to anything just yet, you don't need to do anything with 'em. Those would be for some type of external output ie. datalogger/MAFT/AEM input. Not neccesary for regular use.

07-03-2006, 03:41 PM	#4 (permalink)
TrAb * * Join Date: Nov 2004 Location: Athens, Ga Drives: A Ice Cream Truck... Trader Rating: (23)	Re: Installing WB02 Im datalogging...

07-03-2006, 06:03 PM	#6 (permalink)
TrAb * * Join Date: Nov 2004 Location: Athens, Ga Drives: A Ice Cream Truck... Trader Rating: (23)	Re: Installing WB02 Im using stock 93 TT ecu...Datalogger is from shiver OC palm logger

Sponsored Links
3000GT/Stealth International Message Center Advertisement

07-03-2006, 08:02 PM	#7 (permalink)
jj3kgt Tuning 101 Join Date: May 2002 Location: Charleston, SC Drives: asleep, every day Trader Rating: (9)	Re: Installing WB02 There should be an open pin on the diagnostic connector you can hook the 5 volt single from the AEM to and get the new program from shiver.

07-03-2006, 08:25 PM	#8 (permalink)
TrAb * * Join Date: Nov 2004 Location: Athens, Ga Drives: A Ice Cream Truck... Trader Rating: (23)	Re: Installing WB02 Open pin? What exactly does that mean? And do i not need to hook up the blue wire?

07-03-2006, 08:38 PM	#10 (permalink)
jj3kgt Tuning 101 Join Date: May 2002 Location: Charleston, SC Drives: asleep, every day Trader Rating: (9)	Re: Installing WB02 By "open" I meant a port that you do not need in datalogging that you can either tap into or bypass in order to send the WB signal through. Ask shiver directly as he will know much more about this then I will. Last edited by jj3kgt : 07-03-2006 at 10:26 PM.