blown maf-t??

[elvis2007]

got the all to familiar cel light today,, only this time it didnt go away. upon further tests, the leds in the maf-t dont come on when the key is turned on. it is getting good power on the pink wire in the main harness. and good ground. there is no power to the pink wire in the maf harness.
should i look to buy a replacement or is there a fix?? thanks guys..

[TurboBob]

Originally Posted by elvis2007

got the all to familiar cel light today,, only this time it didnt go away. upon further tests, the leds in the maf-t dont come on when the key is turned on. it is getting good power on the pink wire in the main harness. and good ground. there is no power to the pink wire in the maf harness.
should i look to buy a replacement or is there a fix?? thanks guys..

this happens when the pink wire going to the MAF gets pinched and/or grounded. There is a circuit trace under the wires at the end of the circuit board that burns out.

You can do a quick fix, splice the 2 pink wires together (and look for the pinched spot on the pink wire.) Or you can send the unit in to Full Throttle Speed for repair.

Bob