Some help wanted. - 3000GT/Stealth International Message Center

1991StealthR/T · 06-29-2008, 08:02 PM

I have a couple questions.
1. Can someone send me a link to the thread for "hiding" the rear wiper arm under the wing.

2. Tell me what I need to check for Check Engine Light (I did get the code using this method, and I got #14. Stealth 316 - Reading Diagnostic Codes - 1991-1993 3S models <<< I am looking for a way to fix it BTW and if this helps while I had the plenum off out of the 400 times check spark, comp, and other crap the wires pulled out of the #6 injector and so i stuffed them back in, also the timing is FULLY advanced.

3. Can some one tell me where I can get a Speaker box that's holds 2 12's and will fit in the hatch so I can have my rear seats back.

4. Found some.

Thank you.

onyxice · 06-29-2008, 09:44 PM

Quote:

Originally Posted by 1991StealthR/T

I have a couple questions.
1. Can someone send me a link to the thread for "hiding" the rear wiper arm under the wing.

2. Tell me what I need to check for Check Engine Light (I did get the code using this method, and I got #14. Stealth 316 - Reading Diagnostic Codes - 1991-1993 3S models <<< I am looking for a way to fix it BTW and if this helps while I had the plenum off out of the 400 times check spark, comp, and other crap the wires pulled out of the #6 injector and so i stuffed them back in, also the timing is FULLY advanced.

3. Can some one tell me where I can get a Speaker box that's holds 2 12's and will fit in the hatch so I can have my rear seats back.

4. Found some.

Thank you.

For the speaker box in the hatch, well, I'm stealin' some ideas from here to make one for myself.... but you could take it to a shop and pay out the ass or I believe you can find them on eBay and pay slightly less.... aside from that I'm unsure if you can't make it yourself.

1991StealthR/T · 07-02-2008, 11:14 PM

Alright then I'll just make my own. I just don't have a good way of cutting the speaker holes.

Could someone also tell me how I can clean my rims up extremely clean.

1991StealthR/T · 07-03-2008, 03:58 PM

Nothing?

chrisincobb · 07-03-2008, 04:09 PM

depends on what kind of rims you have. chrome? clear coated?

1991StealthR/T · 07-03-2008, 04:28 PM

chrisincobb - The factory R/T and ES rims untampered (not chromed) and they are covered in road grime and brake dust and bead sealer.

1991StealthR/T · 07-03-2008, 05:15 PM

Some more info about how the car runs of someone wants to help me, When going down the road and barely hit the gas the car sputters and i can feel it give the car a little bit more throttle and it smooths out and the check engine light isn't always on it comes on after 5 min of running and once a while it may not come one.

Also my factory alarm has stopped working and I would like to know why. the fuse and relay are good butt he car isn't arming.

chrisincobb · 07-03-2008, 05:19 PM

anything on the shelf that says "clear coat safe" should work just fine. spray the whole wheel down (including tire) and let it sit a few minutes. next, have a Mr. Clean magic eraser and a bucket of clean water on hand to scrub with. I have seen these remove LOTS of stuff from LOTS of different surfaces and never leaves a scratch. but DO NOT use it on your paint. haven't tried it, and paint is not the place to experiment. i also like to use armor all or something similar to shine the tires.

chrisincobb · 07-03-2008, 05:24 PM

how badly do you need the alarm? problems with those can be a real pain.
about the running condition, have you had the code(s) pulled since the CEL came on? and is it manual or auto?

1991StealthR/T · 07-03-2008, 05:41 PM

Quote:

2. Tell me what I need to check for Check Engine Light (I did get the code using this method, and I got #14. Stealth 316 - Reading Diagnostic Codes - 1991-1993 3S models

I did and that is what I got and it is a 1991 manual DOHC with E-Bay filter and resonator back exhaust. Yea I would the factory alarm because someone right now can get into my engine because there is no main latch.

06-29-2008, 08:02 PM	#1 (permalink)
1991StealthR/T ESR/TWS6 Stealth owner Join Date: Jul 2007 Location: Meshoppen.PA Drives: 91' Stealth eSR/T Trader Rating: (0)	Some help wanted. I have a couple questions. 1. Can someone send me a link to the thread for "hiding" the rear wiper arm under the wing. 2. Tell me what I need to check for Check Engine Light (I did get the code using this method, and I got #14. Stealth 316 - Reading Diagnostic Codes - 1991-1993 3S models <<< I am looking for a way to fix it BTW and if this helps while I had the plenum off out of the 400 times check spark, comp, and other crap the wires pulled out of the #6 injector and so i stuffed them back in, also the timing is FULLY advanced. 3. Can some one tell me where I can get a Speaker box that's holds 2 12's and will fit in the hatch so I can have my rear seats back. 4. Found some. Thank you. __________________ 1991 Dodge Stealth R/T - Passion Red - Spun bearing soon to be TTFWD 1985.5 Mitsubishi Starion - California Red - Blown head gasket and sat for 10+ years. - soon to be either running or sitting until the Stealth is done. Last edited by 1991StealthR/T : 06-29-2008 at 08:53 PM.

07-02-2008, 11:14 PM	#3 (permalink)
1991StealthR/T ESR/TWS6 Stealth owner Join Date: Jul 2007 Location: Meshoppen.PA Drives: 91' Stealth eSR/T Trader Rating: (0)	Re: Some help wanted. Alright then I'll just make my own. I just don't have a good way of cutting the speaker holes. Could someone also tell me how I can clean my rims up extremely clean.

07-03-2008, 03:58 PM	#4 (permalink)
1991StealthR/T ESR/TWS6 Stealth owner Join Date: Jul 2007 Location: Meshoppen.PA Drives: 91' Stealth eSR/T Trader Rating: (0)	Re: Some help wanted. Nothing?

07-03-2008, 04:09 PM	#5 (permalink)
chrisincobb Me=yellow You=purple Join Date: Feb 2008 Location: Rakes are needed. Drives: SHORT DISTANCES Trader Rating: (1)	Re: Some help wanted. depends on what kind of rims you have. chrome? clear coated? __________________

07-03-2008, 04:28 PM	#6 (permalink)
1991StealthR/T ESR/TWS6 Stealth owner Join Date: Jul 2007 Location: Meshoppen.PA Drives: 91' Stealth eSR/T Trader Rating: (0)	Re: Some help wanted. chrisincobb - The factory R/T and ES rims untampered (not chromed) and they are covered in road grime and brake dust and bead sealer.

Sponsored Links
3000GT/Stealth International Message Center Advertisement

07-03-2008, 05:15 PM	#7 (permalink)
1991StealthR/T ESR/TWS6 Stealth owner Join Date: Jul 2007 Location: Meshoppen.PA Drives: 91' Stealth eSR/T Trader Rating: (0)	Re: Some help wanted. Some more info about how the car runs of someone wants to help me, When going down the road and barely hit the gas the car sputters and i can feel it give the car a little bit more throttle and it smooths out and the check engine light isn't always on it comes on after 5 min of running and once a while it may not come one. Also my factory alarm has stopped working and I would like to know why. the fuse and relay are good butt he car isn't arming.

07-03-2008, 05:19 PM	#8 (permalink)
chrisincobb Me=yellow You=purple Join Date: Feb 2008 Location: Rakes are needed. Drives: SHORT DISTANCES Trader Rating: (1)	Re: Some help wanted. anything on the shelf that says "clear coat safe" should work just fine. spray the whole wheel down (including tire) and let it sit a few minutes. next, have a Mr. Clean magic eraser and a bucket of clean water on hand to scrub with. I have seen these remove LOTS of stuff from LOTS of different surfaces and never leaves a scratch. but DO NOT use it on your paint. haven't tried it, and paint is not the place to experiment. i also like to use armor all or something similar to shine the tires.

07-03-2008, 05:24 PM	#9 (permalink)
chrisincobb Me=yellow You=purple Join Date: Feb 2008 Location: Rakes are needed. Drives: SHORT DISTANCES Trader Rating: (1)	Re: Some help wanted. how badly do you need the alarm? problems with those can be a real pain. about the running condition, have you had the code(s) pulled since the CEL came on? and is it manual or auto?