Part # Help Thread! If you have CAPS, help someone out!

[dbest671]

Originally Posted by DntFWitDaWarrior

does any one know the part number for a nonturbo 19923(7, thanks i cant seem to find it anywhere.

What What part are you looking for exactly?

[OhioSpyderman]

Originally Posted by dbest671

What What part are you looking for exactly?

Double ditto...

Bob.

[DntFWitDaWarrior]

sorry didnt even realise what i had wrote. the part number for an 1992 non turbo ECU

[Stealthee]

MD159963

You technically could use 93-95 ECU's as well as long as they are Fed Spec.

[DntFWitDaWarrior]

If i can ask i know not the rite thread but what are fed spec's?

[Stealthee]

Federal Spec.

Basically the MD159963 and MD190662 (93 DOHC) are both Fed Spec.

MD192591 is a Fed Spec ECU for a 95.

The 94 and 95 California Spec has 4 plug ins and wont work.

If you're in search of an ECU I have a 93 and a 95 one for sale. Click the link in my sig to go to my for sale thread.

[JimVR4]

Was at the dealer yesterday to pick up an oil filter and I noticed they had a much newer version of CAPS. Has anyone got the newer version?

[TwinTurboKid]

I need a part# for the trans seal on the right hand side. The seal that's at the trans. Picked one up MD707184, but its way to small. This is off a 6psd if there's a diff.

[Bob]

NEED PART NUMBERS................

I borrowed this pix from 3SX to show what I need. I hope they don't mind.

I couldn't find anything in CAPS, but I don't know how to use it all that well. So....looking at the picture, I already have the pulley and the long bolt shown. I need the short bolt and the adjuster clamp. They are for the AC/Alt Lower Tensioner Pulley. My car is 1994 NA. Thanks in advance for any help! Bob

[OhioSpyderman]

Bob, I'm trying to help, and I can give the bolt part number, but my CAPS is not helping me with that "adjuster clamp" as you call it...

The bolt is MF241886 and Mitsupartsdirect.com calls THAT part a pulley plate and is a $25.XX part...Hope I've helped...

Bob.