Part # Help Thread! If you have CAPS, help someone out!

[OhioSpyderman]

Originally Posted by nawz8r

Thank you Bob, appreciate it!

No problemo

Bob.

[97mits3kgtSOHC]

anyone know the part numbers for:

-all the bolts for the driver motor mount to the block...either 3 or 4 bolts there i forget its been so long
-crush washers for fuel filter


thanks!

[1fstascar]

Anybody have the part number for a ETACS unit for a 98 VR4? Thanks!

[OhioSpyderman]

Originally Posted by 1fstascar

Anybody have the part number for a ETACS unit for a 98 VR4? Thanks!

MR238955 - Control Unit, Time and alarm (95-Up)

Bob.

[1fstascar]

So any ETACS from 95 and on will work? The dealer quoted me at like 350 bucks for that damn thing said it was special only for a 98. Lying bastards.

[OhioSpyderman]

Originally Posted by 1fstascar

So any ETACS from 95 and on will work? The dealer quoted me at like 350 bucks for that damn thing said it was special only for a 98. Lying bastards.

My version of CAPS (2.66) lists 9504.1 as the last date for that control, so I was assuming that it was good for all later models.

Maybe someone can either back me up or tell me I'm full of bulltwinkies!!!

Bob.

[jnight99]

Can someone run this for me in reverse?

MD190004

I need to know what year/model this ECU is for as it doesn't show up on any of our source sites.

Thanks!!!

[97mits3kgtSOHC]

Originally Posted by 97mits3kgtSOHC

anyone know the part numbers for:

-all the bolts for the driver motor mount to the block...either 3 or 4 bolts there i forget its been so long
-crush washers for fuel filter


thanks!

anybody?

[lawdogg]

FYI ..

Originally Posted by Spamsonite

As far as I can tell by looking at 2 old threads on 3si, mn156478 is the part number for a 25 spline 5 spd TC, the threads list it as the "new TC". But if you look at CAPS, they list an old part number, as well as the new one I gave you. You may have trouble finding anyone on this forum who knows the difference for sure. I don't understand what the $400 difference in price is about between MN156072 and MN156478. Doesn't really make sense.

The only solutions I can think of are to: 1. call some big mitsu dealers and ask them (rockville, mentor, etc) or 2. Just order MN156478 and find out first hand if this is exactly what you need.

Here is a quote from the threads I looked at:

"Someone posted the Mitsu part numbers for the replacement TC's under the current "B17" recall (see this thread).

Mits list three part numbers....
MN156477 5-speed small shaft
MN156478 5-speed large shaft
MN156479 6-speed
MN156006 Reseal kit"

This was from 3 years ago.

Originally Posted by SunDown13X

W5MG1-0-FNBR 3000GT 4WD w/ 4WS, 5spd mfg 4/90-5/92

W5MG1-1-FNCR 3000GT 4WD w/ 4WS, 5spd mfg 11/91-5/92

W5MG1-2-FNBR or FCNR 3000GT 4WD w/ 4WS, 5spd mfg 6/92-9/92

W5MG1-3-FNBR or FCNR 3000GT 4WD w/ 4WS, 5spd mfg 10/92-5/93

W6MG1-0-FNBR 3000GT 4WD w/ or w/o 4WS, 6spd mfg 6/93-end

[Beau_Jester]

Originally Posted by 97mits3kgtSOHC
anyone know the part numbers for:

-all the bolts for the driver motor mount to the block...either 3 or 4 bolts there i forget its been so long

MD141687 12x71
MD141688 10x68
MD149778 10x97

crush washers for fuel filter

MD660064 fuel filter gasket for banjo fitting Q=4