Part # Help Thread! If you have CAPS, help someone out! - Page 4 - 3000GT/Stealth International Message Center

SpikeyGG · 04-29-2008, 09:43 PM

Can someone supply the part numbers for the seals / gaskets between the rear active aero spoiler and the trunk? There are three seals two of them may be the same (left and right), I'm not sure. This is for my '93.

Thanks,
-Greg

OhioSpyderman · 04-30-2008, 06:31 AM

MR358264 (2) (left and right are the same)
MR358263 Center

Bob.

stealthxtreme4 · 04-30-2008, 07:41 AM

I need the rubber boot that goes on the outside of the front turbo for the intake pipe to fit on right...

and the hose that goes from the brake booster to the driver side of the intake plenum. It has the checkvalve in it for the brake booster.

OhioSpyderman · 04-30-2008, 09:10 AM

Matt, the brake booster hose says "**NO DATA** and I can't find that rubber thing for the life of me!!!

Sorry,

Bob.

Gramdollar · 05-06-2008, 11:03 AM

anyone find the brake booster hose with the check valve in it yet?

Show Killer · 05-06-2008, 12:29 PM

Quote:

Originally Posted by stealthxtreme4

I need the rubber boot that goes on the outside of the front turbo for the intake pipe to fit on right...

I don't think you can order this seperately. IIRC you have to buy the entire intake pipe to get this rubber boot. It's kinda like the gasket for the y-pipe that you can't buy seperately.

Quote:

Originally Posted by stealthxtreme4

and the hose that goes from the brake booster to the driver side of the intake plenum. It has the checkvalve in it for the brake booster.

According to caps the brake booster hose with the chack valve goes from the metal line on the fire wall to the nipple by the throttle body on the back of the plenum. It is part #MB857312

lawdogg · 05-16-2008, 06:30 AM

Just an FYI, part # MB621817 has been discontinued. This is the metal 'protector' for the rubber fuel tank filler hose. Crap.

Street_Chally73 · 05-22-2008, 06:26 AM

As the title implies, I'm trying to figure out the part numbers for gaskets (three in total) for my Stealth's rear spoiler. Thanks!

I'm also trying to find the factory coin holder (gray in color) as well as the reverse light switch gasket (3SX wants $17.89 S+H for those two items). Thanks again!!

OhioSpyderman · 05-22-2008, 08:59 AM

Quote:

Originally Posted by Street_Chally73

As the title implies, I'm trying to figure out the part numbers for gaskets (three in total) for my Stealth's rear spoiler. Thanks!

I'm also trying to find the factory coin holder (gray in color) as well as the reverse light switch gasket (3SX wants $17.89 S+H for those two items). Thanks again!!

CAPS is a Mitsubishi parts lookup database, it will not have the Stealth gaskets.

Sorry.

Bob.

mugs · 06-02-2008, 05:08 PM

If I have a part # could someone tell me which models the part will fit?

The part # is MR147669. Its a compressor and clutch assy.

Its a 4 bolt for a dohc. Its a mitsu part made for an install by dodge dealers.
Some of the other parts in the kit I have matched already.

Oh and its made in Japan.

Thanks Joe.

04-29-2008, 09:43 PM	#31 (permalink)
SpikeyGG Automotive Geek Join Date: Jan 2006 Location: Zee upper vest side Drives: 1993 3000GT VR-4 Trader Rating: (3)	Re: Part # Help Thread! If you have CAPS, help someone out! Can someone supply the part numbers for the seals / gaskets between the rear active aero spoiler and the trunk? There are three seals two of them may be the same (left and right), I'm not sure. This is for my '93. Thanks, -Greg __________________ 93 VR-4 K&N FIPK, Eibach Pro Sport springs, MSD 8.5mm wires, NGK iridium plugs, solid polyurethane motor mounts, Sumitomo HTR+ tires, gutted precats, adjustable rear control arms, 99 lifters, underhood and console shifter bushings, aluminum dash vents, clutch vacuum assist delete, GM boost logging, full set of Defi gauges. Always a work in progress...

04-30-2008, 07:41 AM	#33 (permalink)
stealthxtreme4 Wannabe Join Date: Jan 2003 Location: Chi-Town / Purdue Drives: 91' Sable Black VR-4 Trader Rating: (24)	Re: Part # Help Thread! If you have CAPS, help someone out! I need the rubber boot that goes on the outside of the front turbo for the intake pipe to fit on right... and the hose that goes from the brake booster to the driver side of the intake plenum. It has the checkvalve in it for the brake booster. __________________ 1991 3000GT VR-4 1992 3000GT VR-4: Work in Progress

04-30-2008, 09:10 AM	#34 (permalink)
OhioSpyderman Former ROTY :-} Join Date: Oct 2000 Location: Dayton, Ohio Drives: Back and Forth :) Trader Rating: (44)	Re: Part # Help Thread! If you have CAPS, help someone out! Matt, the brake booster hose says "NO DATA and I can't find that rubber thing for the life of me!!! Sorry, Bob.

05-06-2008, 11:03 AM	#35 (permalink)
Gramdollar what would dave thomas do Join Date: Jul 2007 Location: Blairsville, PA Drives: 93 pearl white vr-4 Trader Rating: (0)	Re: Part # Help Thread! If you have CAPS, help someone out! anyone find the brake booster hose with the check valve in it yet?

05-16-2008, 06:30 AM	#37 (permalink)
lawdogg Here for the tuna. Join Date: Jul 2003 Location: Williamsport, PA Drives: The Speed Limit Trader Rating: (58)	Re: Part # Help Thread! If you have CAPS, help someone out! Just an FYI, part # MB621817 has been discontinued. This is the metal 'protector' for the rubber fuel tank filler hose. Crap. __________________ 2002 WJ -- 1994 VR-4 -- 1993 ZJ --Canon Rebel XTi Green Cars FTW

Sponsored Links
3000GT/Stealth International Message Center Advertisement

05-22-2008, 06:26 AM	#38 (permalink)
Street_Chally73 RTBOOST Join Date: May 2007 Location: Florence, WI Drives: '91 Stealth R/T TT Trader Rating: (6)	Part Numbers for the Pedastal Gaskets on a Stealth's Spoiler As the title implies, I'm trying to figure out the part numbers for gaskets (three in total) for my Stealth's rear spoiler. Thanks! I'm also trying to find the factory coin holder (gray in color) as well as the reverse light switch gasket (3SX wants $17.89 S+H for those two items). Thanks again!! __________________ '73 Dodge Challenger 340.............................(X) '91 Firestorm Red Stealth R/T TT...................(X) Last edited by Street_Chally73 : 05-22-2008 at 07:29 AM. Reason: Updated Information

06-02-2008, 05:08 PM	#40 (permalink)
mugs Forum Member Join Date: May 2002 Location: Canada Trader Rating: (0)	Re: Part # Help Thread! If you have CAPS, help someone out! If I have a part # could someone tell me which models the part will fit? The part # is MR147669. Its a compressor and clutch assy. Its a 4 bolt for a dohc. Its a mitsu part made for an install by dodge dealers. Some of the other parts in the kit I have matched already. Oh and its made in Japan. Thanks Joe. __________________ Some people are alive simply because it's illegal to kill them!! If I help you out, please help make the community better and pay it forward. Last edited by mugs : 06-02-2008 at 05:10 PM. Reason: Added info and a Thank-you.