New product on the horizon - Page 9 - 3000GT/Stealth International Message Center

KILURV8 · 07-28-2005, 08:56 AM

What will the unit beable to datalog? Will it be able to monitor and log knock?

TurboBob · 07-28-2005, 09:14 AM

The unit has VE table, and "User Tune". The User Tune is accessed via the keypad and you tune the car with it for the most part. If you improve the airflow, the VE of the engine does go up. You can compensate using the User Tune very easily. The unit doesn't automatically re-tune, but with the WideBand it can maintain your desired AFR at WOT. The ECU will do a good job of keeping things right at part throttle.

We are adding the 1G datalogging functions, 2G is more difficult. Knock on a 2G is not currently possible with any system.

Bob

bigballsofpaint · 07-28-2005, 02:51 PM

you mean the 1g and hybrid datalogging functions right??

runner4053 · 07-28-2005, 04:25 PM

There's a lot to read here, so i skipped a bit. In a nut shell, I could use this with my 720cc's, back off timing, and plug it into my LM-1? If so, put me down for one, I've got the money in hand.

TurboBob · 07-28-2005, 06:37 PM

Quote:

Originally Posted by runner4053

There's a lot to read here, so i skipped a bit. In a nut shell, I could use this with my 720cc's, back off timing, and plug it into my LM-1? If so, put me down for one, I've got the money in hand.

yup.

Pre-orders are being handled at Full Throttle Speed.

Bob

TurboBob · 07-28-2005, 06:38 PM

Quote:

Originally Posted by bigballsofpaint

you mean the 1g and hybrid datalogging functions right??

1G for now, Hybrid later.

Bob

ldcarson · 07-31-2005, 03:10 AM

TurboBob - 1995 VR-4, Just got some 13T's. I need to obviously upgrade injectors, possible fuel pump. I am guessing this would work well (MaftPro) for this setup. Would you concur and tell me what all I would need. thanks

runner4053 · 07-31-2005, 10:03 AM

I already ordered one. Will this come with detailed instructions that apply to my car (it's a hybrid ecu) or will someone have to do a write up on install?

TurboBob · 07-31-2005, 05:29 PM

ldcarson: sounds a lot like my car, I have 13G's and will be installing 450's and a Walbro pump.

runner4053: The install is not that difficult. The initial shipments will have some brief instructions. I will be here to help whomever needs me.

Bob

Rustang Cobra · 07-31-2005, 05:49 PM

is it still on schedule to ship out within 2 weeks or so?

07-28-2005, 08:56 AM	#81 (permalink)
KILURV8 Drives like Hell Join Date: Jul 2005 Location: Lake in the Hills,IL Drives: 1998 VR4 (20K Miles) Trader Rating: (27)	Re: New product on the horizon What will the unit beable to datalog? Will it be able to monitor and log knock? __________________ Sold - 1998 Mitsubishi 3000GT VR4 (20K miles) - 400awhp on 93 (16psi) - 118 mph in 1/4 on pump - Sold

07-28-2005, 09:14 AM	#82 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (17)	Re: New product on the horizon The unit has VE table, and "User Tune". The User Tune is accessed via the keypad and you tune the car with it for the most part. If you improve the airflow, the VE of the engine does go up. You can compensate using the User Tune very easily. The unit doesn't automatically re-tune, but with the WideBand it can maintain your desired AFR at WOT. The ECU will do a good job of keeping things right at part throttle. We are adding the 1G datalogging functions, 2G is more difficult. Knock on a 2G is not currently possible with any system. Bob __________________ Need a datalogger? Check out the Scanmaster 3 PM me about ECU mods for 8000+ RPM rev limits !!!!!!!! Stock = 7300 RPM Stage 1 = 8060 RPM Stage 2 = 8200 RPM Stage 3 = 8400 RPM Stage 4 = 8800 RPM (By request only) 1991 Stealth RT/TT, Grooms Shortblock, 13G's. My Stealth is for sale, 65000 miles, runs perfectly. $6,500 (a bargain)

07-28-2005, 02:51 PM	#83 (permalink)
bigballsofpaint Paintball is cheaper Join Date: Mar 2003 Location: CT Drives: 95 3k, 03 vue Trader Rating: (25)	Re: New product on the horizon you mean the 1g and hybrid datalogging functions right?? __________________ no more 3/s, saturn vue for now.

07-28-2005, 04:25 PM	#84 (permalink)
runner4053 the car whisperer Join Date: May 2003 Location: Univ. of Illinois Drives: 96 RT/TT Trader Rating: (4)	Re: New product on the horizon There's a lot to read here, so i skipped a bit. In a nut shell, I could use this with my 720cc's, back off timing, and plug it into my LM-1? If so, put me down for one, I've got the money in hand. __________________ 96 RT/TT It lives again. major performance mods: DR1000's, FMIC, MAFT-PRO speed density, 720 cc, supra pump with hotwire, Fuellab FPR, billet rails, ported heads, 1mm over intake and 1 mm over iconel exhaust valves. spec 3+ clutch, fidenza flywheel, 2 piece Al driveshaft, Supercar baffled oil pan, relocated battery, custom exhaust, reinforced bellhousing, 3sx poly motor mounts, intrax with GR-2, lots' of little things. ................and 18" chromies........

07-31-2005, 03:10 AM	#87 (permalink)
ldcarson Forum user Join Date: Sep 2003 Location: South Central IRAQ! Drives: 98SOHC SDS/95VR-4 Trader Rating: (27)	Re: New product on the horizon TurboBob - 1995 VR-4, Just got some 13T's. I need to obviously upgrade injectors, possible fuel pump. I am guessing this would work well (MaftPro) for this setup. Would you concur and tell me what all I would need. thanks

Sponsored Links
3000GT/Stealth International Message Center Advertisement

07-31-2005, 10:03 AM	#88 (permalink)
runner4053 the car whisperer Join Date: May 2003 Location: Univ. of Illinois Drives: 96 RT/TT Trader Rating: (4)	Re: New product on the horizon I already ordered one. Will this come with detailed instructions that apply to my car (it's a hybrid ecu) or will someone have to do a write up on install?

07-31-2005, 05:29 PM	#89 (permalink)
TurboBob Resident mad scientist Join Date: Jan 2003 Location: Near Detroit Drives: 86 GN 91 RT/TT Trader Rating: (17)	Re: New product on the horizon ldcarson: sounds a lot like my car, I have 13G's and will be installing 450's and a Walbro pump. runner4053: The install is not that difficult. The initial shipments will have some brief instructions. I will be here to help whomever needs me. Bob

07-31-2005, 05:49 PM	#90 (permalink)
Rustang Cobra I think my cars drunk... Join Date: Jul 2003 Location: Lexington, MA Drives: girls crazy Trader Rating: (31)	Re: New product on the horizon is it still on schedule to ship out within 2 weeks or so? __________________ 2003 Nissan 350z - New toy 1993 Stealth Twin Turbo - Sold Old Dyno w/15gs- 404awhp/398awtq @17psi mustang dyno - SOLD 1998 Mustang cobra - RIP Dyno 275rwhp/278rwtq 92 Honda Civic CX Hatchback - Winter beater