looking for tips for removel of the tc - 3000GT/Stealth International Message Center

95 RT/TT · 07-09-2008, 07:20 PM

i looked around last night and did not find anything helpful. (i have 6sp) i took out the 5 bolts and i used a screwdriver to pry a little but i did not want to do it too much. and i tryed to pull by hand and that also was a no go. so what is the easy way to do this? if there is one.

thanks for your info.

jerrid

oohnoo · 07-09-2008, 07:33 PM

Bigger screwdriver, sersously.

lawdogg · 07-10-2008, 04:16 AM

Yep.

Like ... a prybar. Pry evenly front / back and it should wiggle out.

jat2339 · 07-10-2008, 12:21 PM

push up on the driveshaft to relieve pressure on the tcase, it worked great for me after a dinged up my tcase tring to pry it off.

gltasn · 07-10-2008, 01:21 PM

pry harder, you are pulling it off of a drive shaft, and be ready to catch/hold it. its approx 25 lbs. j sin

07-09-2008, 07:20 PM	#1 (permalink)
95 RT/TT Forum Member Join Date: Aug 2003 Location: jackson, michigan Drives: 95rt/tt, suzuki Trader Rating: (0)	looking for tips for removel of the tc i looked around last night and did not find anything helpful. (i have 6sp) i took out the 5 bolts and i used a screwdriver to pry a little but i did not want to do it too much. and i tryed to pull by hand and that also was a no go. so what is the easy way to do this? if there is one. thanks for your info. jerrid

07-09-2008, 07:33 PM	#2 (permalink)
oohnoo Verified Seller Join Date: Apr 2003 Location: LI,NY Trader Rating: (137)	Re: looking for tips for removel of the tc Bigger screwdriver, sersously. __________________ ----------------[2007 Ride of the Year *"Stroke" her I did.* Retired - TD04 WRX19t's = 513awhp @ 18psi on PUMP

07-10-2008, 12:21 PM	#4 (permalink)
jat2339 Nuclear Nerd Join Date: May 2005 Location: Wisconsin Drives: 1991 Stealth TT Trader Rating: (1)	Re: looking for tips for removel of the tc push up on the driveshaft to relieve pressure on the tcase, it worked great for me after a dinged up my tcase tring to pry it off. __________________ Mod. list Stillen down pipe w/gutted rear pre-cat. Greddy Profer E-01 on the way. HKS cosmo fuel pump w/ hotwire. Matrix open element air filter. NGK 8MM plug wires Carbotech slotted rotors. Maximal Tcase bracket. more to come....EVO 560's and 15G's and an SAFC-2???

07-10-2008, 01:21 PM	#5 (permalink)
gltasn j sin Join Date: Apr 2008 Trader Rating: (0)	Re: looking for tips for removel of the tc pry harder, you are pulling it off of a drive shaft, and be ready to catch/hold it. its approx 25 lbs. j sin __________________ "If I was as slow as you, they'ed bury me!" terry canfield(dad)

Sponsored Links
3000GT/Stealth International Message Center Advertisement