holset turbo? - 3000GT/Stealth International Message Center

D@GE · 03-20-2008, 12:53 PM

I plan on using a holset HX35 or HX40 for my single setup but I can't find anywhere what kind of HP they support, the only thing they show is what a diesel will make with them so I would like to know what both turbo's will produce

thanks

Kyle

91vr4n00maxima · 03-20-2008, 01:01 PM

find the compressor maps and airflow numbers. that will tell you

vr4_rider · 03-20-2008, 01:23 PM

I'm running a HX40 on mine

But the engine needs to be put in.

I hear only good things about the 35 in the DSM community, and my buddy has a 35 in his dizzum and he smokes z06 and smokes all fours.

the 40 is suppose to be able to create 650awhp on a dsm.

there is a member (napa) that has a few vids of the 40 on an engine dyno.

T

http://www.dsmparts.com/customer/pro...cat=166&page=1

D@GE · 03-20-2008, 03:10 PM

thanks, if an HX40 can make that much power then I'm not that interested in it since my HP goals are low (450-500 awhp), I figure the HX35 should get me my goals and not have too much lag

Kyle

coz · 03-21-2008, 02:43 AM

The HX turbos is a very common turbo here in sweden and ppl use anything from hx35 to hx60.
I would NOT recommend using a HX35 above 400awhp, its too small. you should definitely go with the hx40 if you are aiming for 450-500awhp.
Simply measure the compressor inducer and you will see...

Iam using a pair of holset hx35 by the way.

ras463us · 03-21-2008, 05:32 AM

check out this calculator on: http://www.squirrelpf.com/turbocalc/index.php

coz · 03-22-2008, 03:36 AM

Quote:

Originally Posted by ras463us

check out this calculator on: http://www.squirrelpf.com/turbocalc/index.php

Thats a nice calculator.. try 650awhp (750-800hp) on a HX35 and see how far off you'll be in the compressor map =) the dots wont even be visible...

vr4_rider · 03-22-2008, 06:16 AM

Hey, Coz.

You have twin hx35s?? How are they? How do they spool? How do they sound compare to other twins?

coz · 03-23-2008, 02:31 AM

Quote:

Originally Posted by vr4_rider

Hey, Coz.

You have twin hx35s?? How are they? How do they spool? How do they sound compare to other twins?

Yes twin hx35, i havent really had the chance to test them enough.. ive only gone to about 21 psi with many boost/vakum-leaks.. but they are fixed now.

With the leaks and a bad/(slow respons) vakum hose routing to the wastegates i had about 1 bar at 5500. When i start her up the next time i will be using my electric boost solenoid to keep the wg shut until i have full boost.
(i have exhaust housing #12cm2)

I heavent heard many other big twin setups IRL so i dont know about the sound.. heres a vid with short 3" sidepipes and race cams

http://www.youtube.com/watch?v=BUCMnfYRNYM

(expect a dark video with no action

)

How does a singel hx40 perform? i guess the respons is REALLY good?
What exhaust housing do you use?

Devilmightcry · 03-23-2008, 04:50 AM

Quote:

Originally Posted by vr4_rider

http://www.dsmparts.com/customer/pro...cat=166&page=1

interesting. it says the turbos bolt up to td05 flangs. i wonder if i can replace my 16gs with those later.

03-20-2008, 12:53 PM	#1 (permalink)
D@GE O'Doyle Rules! Join Date: Jan 2005 Location: Ontario Drives: Miss Daisy Trader Rating: (10)	holset turbo? I plan on using a holset HX35 or HX40 for my single setup but I can't find anywhere what kind of HP they support, the only thing they show is what a diesel will make with them so I would like to know what both turbo's will produce thanks Kyle __________________ I AM CANADIAN...... 92 RT/TT guardrail mod 95 RT/TT IT LIVES!!!

03-20-2008, 01:01 PM	#2 (permalink)
91vr4n00maxima est. sept, 2000 Join Date: Sep 2000 Location: vancouver, wa Drives: slow 97 VR4 Trader Rating: (17)	Re: holset turbo? find the compressor maps and airflow numbers. that will tell you __________________ 97 VR4 12.417@111.16 9b time. full weight almost BPU 95 mark viii. 14.35@98 03 cobra vert. 4 mods=118mph traps 91 stealth TT. td05 18G, heads/cams, 3000lbs

03-20-2008, 01:23 PM	#3 (permalink)
vr4_rider USMC Join Date: Feb 2002 Location: Iowa Drives: '93 Vr4; '06 675cc Trader Rating: (10)	Re: holset turbo? I'm running a HX40 on mine But the engine needs to be put in. I hear only good things about the 35 in the DSM community, and my buddy has a 35 in his dizzum and he smokes z06 and smokes all fours. the 40 is suppose to be able to create 650awhp on a dsm. there is a member (napa) that has a few vids of the 40 on an engine dyno. T http://www.dsmparts.com/customer/pro...cat=166&page=1 __________________ Trung [1993 Pearl Black VR-4] Appearance//1999 Front end//ground controls w/ adj. rear control arms//18x9 5Zigen 5ZR wrapped in 245 front, 275/35/ZR18 Falkens//DR Racing Black lugnuts Mods//GReddy EBC Spec-II//Greedy Type-S BOV//Unorthodox UD pulley//ATR Downpipe//IPS Single Shot Magnaflow//255 Walbro pump//GReddy Profec Spec II EBC//JET tuned ECU//AutoMeter Boost gauge//HKS Turbo Timer//Gutted Hi-Flow DynoMaxx CC//Vac Reduction//EGR Block off//PRO-M 80mm MAS and MAF-T Tuner//EVO 8 560cc injectors //Shriver's datalogger Turbos: 13Tx2 Current Problem(s): Cherries in the rear view mirror In the Process: Nothing Want to Trade/Buy: Cams and springs, non-OEM clutch and flywheel... Last edited by vr4_rider : 03-20-2008 at 01:47 PM.

03-20-2008, 03:10 PM	#4 (permalink)
D@GE O'Doyle Rules! Join Date: Jan 2005 Location: Ontario Drives: Miss Daisy Trader Rating: (10)	Re: holset turbo? thanks, if an HX40 can make that much power then I'm not that interested in it since my HP goals are low (450-500 awhp), I figure the HX35 should get me my goals and not have too much lag Kyle

03-21-2008, 02:43 AM	#5 (permalink)
coz Forum Member Join Date: Dec 2003 Location: Sweden Drives: 3000GT Trader Rating: (0)	Re: holset turbo? The HX turbos is a very common turbo here in sweden and ppl use anything from hx35 to hx60. I would NOT recommend using a HX35 above 400awhp, its too small. you should definitely go with the hx40 if you are aiming for 450-500awhp. Simply measure the compressor inducer and you will see... Iam using a pair of holset hx35 by the way. __________________ 11,7 sec. with td04HL 16T 7cm2 (on e85) xx,x sec. with twin Holset HX-35 (still on e85)

Sponsored Links
3000GT/Stealth International Message Center Advertisement

03-21-2008, 05:32 AM	#6 (permalink)
ras463us '92 VR4 Join Date: Apr 2007 Location: Kansas City, MO Drives: 1992 VR4 Trader Rating: (13)	Re: holset turbo? check out this calculator on: http://www.squirrelpf.com/turbocalc/index.php __________________ Ricer: from the latin word Ricarius meaning to suck at everything you attempt A person who makes unnecessary modifications to their most often import car (hence the term "rice") to make it (mostly make it look) faster. The most common modifications are (but not limited to): - Huge exhaust that serves no purpose but to make the car louder - Large spoiler on the back that looks like something Boeing made for the 747 - Lots of after-market company stickers they don't have parts from, but must be cool - Expensive rims that usually cost more than the car itself - Body kit to make the car appear lower, usually accented with chicken wire - Clear tail lights and corner signals - A "performance intake"- a tube that feeds cold air to their engine usually located in areas of excessive heat (behind or on top of the engine) - Most of these riced cars (a.k.a. rice rockets or rice burners) are imports; Honda Civics, Accords, Integras, CRXs, RSXs, Del Sols Mitsubishi Eclipses, Lancers, Subaru Imprezas, however there are some domestics such as Chevrolet Caviliers, Dodge Neons, Ford Focus; small, slow, economy cars designed specifically to go slow. Please note that some 3000gt's Supras, Skylines, WRX's and other higher performance imports are designed to go fast, and are therefore not always considered rice, but it really depends on the severity of the case. (courtesy urban dictionary)

03-22-2008, 06:16 AM	#8 (permalink)
vr4_rider USMC Join Date: Feb 2002 Location: Iowa Drives: '93 Vr4; '06 675cc Trader Rating: (10)	Re: holset turbo? Hey, Coz. You have twin hx35s?? How are they? How do they spool? How do they sound compare to other twins?