Content Wrapper

[jedimastermopar]

Ok, so The parts list and plans are starting to grow,
Here is what my plans are for gathering parts.

GNX Turbo(1987 TBO372) w adjustable wastegate
Custom Downpipes
2.5 inch exhaust with high flow Cat, rsinator and Magna flow exhuast
Spliced single O2 sensor
TT ECU
TT Fuel Pump
My plan was to use 2.5 inch SS Mandrel bent Downflow into a 2-1 collector under Passenger side of the engine, then up to mount the turbo near the Passener shock tower(Slight hood modifcation may be required)

2.5 inch down from the turbo back to a stockish location behind the engine and straight back to a shorteded side exit exhaust, piggy backing the Flex pipe, cat resinator and exhaust side exit tip in front of the passenger rear wheel well(or maybe just straight back)

Upgrade the Radiator to the larger TT radiator
Oil Cooler(required???)
Oil housing from a TT, Oil cooler lines will be custom as well
SAFC2
Boost, exhaust temp guages

Airbox and connections will obviously be hand made as well.

As for the fuel injectors, I was figuring on the 360cc injectors with resistors, as the GN's use 40 pound injectors I figure they will be a good place to start, (360 cc, is about 34 pounds), if anyone has a better idea let me know. Maybe Gn sized 420cc or so injectors woul dbe a better starting point.

Anyway, this is just the start and likely won't happen for a while, turbo this month, misc parts next month, maybe start fabricating in a couple months....

Anyway, if anyone can help me out with used parts that I may need or anything I am missing it would be appreciated. I have turboed a few other cars in the past, but not a stealth.