3000GT/Stealth International Message Center - View Single Post - FAL Flex-a-lite Radiator Fan Wiring?

gltasn · 07-23-2008, 07:56 PM

i spiced both sets of NEW fan wires together(red,red/blk,blk). remove the molex/conector at the top left of OLD fans(as installed). it has 4 wires in a shroud. (blk-stripe,blue-stripe/black,blue)the striped wires lead to temp sensor. zip tie the temp sensor to the fans,away from header. the other 2 wires are: blue=hot and black is ground. this eliminates the ac sensor and is very easy to do, use heat shrink as it might get wet someday. once you follow this you could easily wire the ac fan to it seperately. but to me more cooling is more power! j sin

07-23-2008, 07:56 PM	#2 (permalink)
gltasn j sin Join Date: Apr 2008 Location: alaska, anchorage Drives: 95 mitz 3kgt vr4 Trader Rating: (0)	Re: FAL Flex-a-lite Radiator Fan Wiring? i spiced both sets of NEW fan wires together(red,red/blk,blk). remove the molex/conector at the top left of OLD fans(as installed). it has 4 wires in a shroud. (blk-stripe,blue-stripe/black,blue)the striped wires lead to temp sensor. zip tie the temp sensor to the fans,away from header. the other 2 wires are: blue=hot and black is ground. this eliminates the ac sensor and is very easy to do, use heat shrink as it might get wet someday. once you follow this you could easily wire the ac fan to it seperately. but to me more cooling is more power! j sin __________________ "If I was as slow as you, they'ed bury me!" terry canfield(dad)