Re: 2nd gen conversion questions
I just did mine. Check out my thread on 91 To 98 conversion. You need to cut off about 4 inches from your stock 1g bucket. You need to modify the inner bucket wall to fit the light.
I took angle iron, banged it flat and tapped into the existing holes for the bumper. Motivated took about 9-10 hours with 2 people. Unmotivated with 1 will take alot longer. Plus you will have to make sure that the hood lines up and that the lights are lined up properly.
It takes alot of work. ALOT
__________________
There is no such thing as LUCK...Luck is when opportunity meets prepardness
|
