View Single Post
Old 06-16-2008, 02:30 PM   #4 (permalink)
defgh1
Senior Member
 
defgh1's Avatar
 
Join Date: Mar 2002
Location: Dunnellon, FL
Drives: 99 VR4, 04Volvo V70R
Trader Rating: (8)
defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7defgh1 Level 7
Default Re: Dragging SPEC II, not sure why

Quote:
Originally Posted by Blue94VR4 View Post
In my case it gets worse after I drive for a while, when clutch gets warm.
If you verified that the clutch slave cylider is always fully depressing the release fork then you have a problem inside the bellhousing.

Doug H
__________________


91 Sandstorm TT, 431 AWHP, 433 ft-lbs. , Kormex 25 spline,LSD, RPS CC Clutch, 4 bolt conversion, Super 15Gs, Stage 3 heads, DSM Sidemounts, PST Driveshaft, Blitz DSBS, HKS Exhaust, 3SX Downpipe, Supra Pump, 780 cc PTE Injectors, SX Fuel reg. & dual feed, AEM, Duel WJO Wideband, HKS DL1, Alcohol Injection. Photos: -->
defgh1 is offline   Reply With Quote