3000GT/Stealth International Message Center - View Single Post

Rom3BreaK · 06-12-2008, 10:17 AM

Thanks, that does help me with my e-brake related question.

I think the point of wiring this into the ignition also is to turn on the BC when the car is turned on, and turn it off when the car is off. I do think that this would happen anyways if wired to something like the cig. lighter seeing as how there's no power to it when the car is off.....Sort of confusing. Either way, the manual on pg 7 of that link does say to connect to a +12V AND ignition...or is the ignition wire ALSO for the turbo timer, and these are just really poor instructions?

If it is needed for the BC, can someone confirm that the ignition wire in a 92 vr4 is a black wire with a white stripe?

06-12-2008, 10:17 AM	#3 (permalink)
Rom3BreaK Verified Seller Join Date: May 2007 Location: Northern CT Drives: Mitsu 92 VR4 Trader Rating: (7)	Re: EBC wiring (ignition wire?) Thanks, that does help me with my e-brake related question. I think the point of wiring this into the ignition also is to turn on the BC when the car is turned on, and turn it off when the car is off. I do think that this would happen anyways if wired to something like the cig. lighter seeing as how there's no power to it when the car is off.....Sort of confusing. Either way, the manual on pg 7 of that link does say to connect to a +12V AND ignition...or is the ignition wire ALSO for the turbo timer, and these are just really poor instructions? If it is needed for the BC, can someone confirm that the ignition wire in a 92 vr4 is a black wire with a white stripe? __________________ 1992 VR4, Java Black Pearl paint ('04 STI) with combo '92/'96/'99 custom front end, Fittipaldi Force wheels, RPS Max pressure plate with street disk, P.I.T. BCU+ EBC, Gutted pre-cats, Greddy type RS BOV, K&N intake. Currently working a minimum wage job to get my 3s back to 100% (again) as well as pay for tuition....AKA the stereotypical proud 3si member.