3000GT/Stealth International Message Center - View Single Post - Boost Problem after EBC install...help plz

bcarroll76 · 06-11-2008, 09:41 AM

Looks like I have the problem solved...mostly... I was running on my low boost setting of 7psi I went to the high boost which is set at 15 and have been playing with the gain a bit... I am boosting around 12-13 psi and the gain is real touchy I am trying to get around 14.5 to 15 ....where should I set my Warn setting to tell me of overboost? I have it set at 17 should I increase that a lil bit...

one question.. if I have a boost leak can that cause a little fluctuation and a little bit of overboost? when I get on it hard it will spike to a little above 17 so I get the cut and red light on EBC...

actually all in all I am impressed with this EBC ...!

06-11-2008, 09:41 AM	#5 (permalink)
bcarroll76 I love my money pit!! Join Date: Apr 2008 Location: where fines are less Drives: 95 Pearl VR4 Trader Rating: (2)	Re: Boost Problem after EBC install...help plz Looks like I have the problem solved...mostly... I was running on my low boost setting of 7psi I went to the high boost which is set at 15 and have been playing with the gain a bit... I am boosting around 12-13 psi and the gain is real touchy I am trying to get around 14.5 to 15 ....where should I set my Warn setting to tell me of overboost? I have it set at 17 should I increase that a lil bit... one question.. if I have a boost leak can that cause a little fluctuation and a little bit of overboost? when I get on it hard it will spike to a little above 17 so I get the cut and red light on EBC... actually all in all I am impressed with this EBC ...!