Quote:
Originally Posted by 93stealthRT2fast4u
ok in all three wiring diagrams i have pin# 31 B/Y is parking signal. in some causes when ive tryed metering this in other cars, if the gear sifter is not right in place or if you have your foot on the brake it interrupts the signal there for non-meterable hope this helps ill keep looking to se if you might be able to meter an grab it from somewhere else
|
It helps, but it leads me to wonder why my remote start didn't work with that wire. I believe that runs off of a postive signal, so I had to relay my P/N safety wire to ground. That didn't seem to work, so I just grounded it as a temporary measure.
Do you have a listing of the other pins at the TCU?