Quote:
Originally Posted by Tasker21
I did a couple quick searches and found nothing on this. I have a 96 vr4 and am trying to hook up my aem ems with the map and IAT sensors. Where do the 2 wires for the IAT go. Also I read there is a white and black wire. Mine has 2 black wires. Polarity must not matter? Thanks.
|
Polarity doesn't matter - it is just a thermistor (resistance varies according to temperature). It connects to the ground and temp sensor wires on the factory MAF connector. I don't know offhand what the colors are or pin numbers, but you should be able to figure that out from the service manual.