Quote:
Originally Posted by JeffWVR4
Check to make sure that the bracket that holds the two shifter cables onto the bellhousing is bolted tightly, and that both cable ends are securely fastened to the gear change levers on the tranny. Sometimes this is overlooked during installation.
Also, you said something about 2 of the 6 bolsts missing. There are also 2 stay brackets that help secure the lower part of the bellhousing to teh bock. There's 4 bolts securing these two brackets to the bellhousing. Are those missing too?
|
Not sure if they were missing. He mentioned other misc. bolts were loose/missing. All of the bolts have been replaced though. I will check the linkage tonight if the rain holds off. Thanks for the advice.
Rob