3000GT/Stealth International Message Center - View Single Post - What do I need to to to get 450+ to the wheels?

ArmyVR4 · 05-14-2008, 05:17 PM

i can show you my 18 psi dyno sheet and mod list 18 psi 421 awhp , with a boost leak on the higher end. 91 pump gas, no timing changes , no knock
mods
-------------------------------------------
7 heat range plug gapped to .026
speed density
vacum reduction
Emanage Ultimate W/ Boomslang
wahlbro 255lph fuel pump
RLP Custom Dual Exhaust
FMIC
turbo xs MBC
obx down pipe
gutted precats no main cat
Ips Hotwire Kit
15g turbos
turboxs rfl
aws delete
evo 560 fuel injectors
super car engineering EGR block off plates
full dejon intake pipes
greddy pressure sensor
Tuned By Chad @ Modified By KC
---------------------------------------------
that should be everything that is pertinant to dyno results
this sheet is before i had my findanza flywheel in andi list aws delete because it is parasitic load on a stock drivetrain
we had seen torque numbers closer to 430 but was running very very rich , we lost some torque but gained some more hp by leaning it out alittle. from what ui have heard these turbos are capable of pushing out some more psi but shortly after on my trip home the clutch started slipping so i havent even had a chance to mess with it

05-14-2008, 05:17 PM	#29 (permalink)
ArmyVR4 Forum user Join Date: Feb 2008 Location: sc/ia Drives: 96 vr4 Trader Rating: (5)	Re: What do I need to to to get 450+ to the wheels? i can show you my 18 psi dyno sheet and mod list 18 psi 421 awhp , with a boost leak on the higher end. 91 pump gas, no timing changes , no knock mods ------------------------------------------- 7 heat range plug gapped to .026 speed density vacum reduction Emanage Ultimate W/ Boomslang wahlbro 255lph fuel pump RLP Custom Dual Exhaust FMIC turbo xs MBC obx down pipe gutted precats no main cat Ips Hotwire Kit 15g turbos turboxs rfl aws delete evo 560 fuel injectors super car engineering EGR block off plates full dejon intake pipes greddy pressure sensor Tuned By Chad @ Modified By KC --------------------------------------------- that should be everything that is pertinant to dyno results this sheet is before i had my findanza flywheel in andi list aws delete because it is parasitic load on a stock drivetrain we had seen torque numbers closer to 430 but was running very very rich , we lost some torque but gained some more hp by leaning it out alittle. from what ui have heard these turbos are capable of pushing out some more psi but shortly after on my trip home the clutch started slipping so i havent even had a chance to mess with it Last edited by ArmyVR4 : 05-14-2008 at 05:25 PM.