Quote:
Originally Posted by 10CentGT
Ok I have mine set at;
3500
7000
4000(rpm to up shift)
-5
throttle position at 50%
I have the stage 2 wiring
I also have fidanza came gears set at +1 on the intake and -3 on the exhaust if that makes a difference.
When I try to start, the RPM just jumps to 7000 then back close to zero. At one point the RPM was fluctuating between 4000 and 7000. What im I doing wrong? Do I have to get my RPM signal from a certain point other than in the tage two wiring?
|
Search function owns me. I read from
eManage Ultimate v2.16
I have to get the RPM signal from "Ignition input signal" in the parameter setting. So it's working, but I saw just about a 3 Ib boost build up. I will play around with the RPM and how much I retard my timing and see what comes out of it.