3000GT/Stealth International Message Center - View Single Post

Fred 62 · 05-12-2008, 08:51 AM

i used a small switch to control a 40A relay for powering on the labonte system. a green led give me the state of the contact of the relay .

on the pillar pod,
a red light is flashing if i have the low fluid level in the tank.
a yellow led is lighting when the pump is activated.

i installed the boost bypass valve just before the wastegates.

i made the check of the install and the pump is runing great without any noize.
( all the documents are easy to understand. this is a really good point )
the touch screen is really good and all parameters are easy to set.

now i will need to play with methanol !

@+
fred

05-12-2008, 08:51 AM	#2 (permalink)
Fred 62 Forum Member Join Date: May 2005 Location: FRANCE Trader Rating: (0)	Re: my labonte system ! i used a small switch to control a 40A relay for powering on the labonte system. a green led give me the state of the contact of the relay . on the pillar pod, a red light is flashing if i have the low fluid level in the tank. a yellow led is lighting when the pump is activated. i installed the boost bypass valve just before the wastegates. i made the check of the install and the pump is runing great without any noize. ( all the documents are easy to understand. this is a really good point ) the touch screen is really good and all parameters are easy to set. now i will need to play with methanol ! @+ fred __________________ Donnes le meilleur de toi même en toutes circonstances DN precat & manifold, downpipe, JIC exhaust, TD04 HL15G, IK27, Magnecor 8.5, EGR & canister & solenoids removed, Samco hoses, FIPK air filter, HKS twin power DLI, RPS max clutch & flywheel, DN intake pipes & Paceproducts intercoolers 680cc injectors, emanage ultimate, GM boost solenoid, PLX-R500, MMCD1.8 + palm, 7 gauges + pillar pods, blitz turbo timer blitz DSBC boost controller, tein type S springs, strut bars 3SX & sways bars, DBA brake discs, Goodridge Stainless-Steel Brake Lines carbon pads, shift boot and knob, kevlar timing belt, oil line kit 3SX, supra pump, boost a pump, fuel fiter and fuel rail adapter & modifications 92.5 wiseco pistons, clevitte bearings, ferrea 1mm oversized valves, head porting, fidanza can gears -3/+1, etc...