Quote:
Originally Posted by Blue94VR4
I am looking at the master clutch cyl description in the manual and I do not see anything that looks like a bleeder valve inside. Does it have one?
|
Jack will have to answer on the bleeder to be sure, but even if not I'd still follow the steps and at least adjust the rod a little and see if that helps - every time I've had this problem the clutch was dragging (either because of improper adjustment, air in the line, bad slave - pull back the boot and check for leaks, or bad master - check for leaks inside the car). 7/10 times it's just been an adjustment issue.