3000GT/Stealth International Message Center - View Single Post

boostedgt · 05-11-2008, 04:28 PM

woah wain now im confised...when i typed my last post your picture did not show up for me, and somebody told me that the sensor was on the intake cam.... i thought it was on the exhaust cam. but all i know for shure is that the cam that has the sensor on it is marked with a "N"

some body who knows please chime in and tell me the answer to the following...

On a 93 Vr4 is the cam sensor on the intake or exhaust cam?

also dose it really matter if i bolt the cam caps down ontop of the seals rather than pushing them in after.... because i do not have the special tool for that.

05-11-2008, 04:28 PM	#12 (permalink)
boostedgt Forum Member Join Date: Jul 2007 Location: northern nj Drives: 93 VR-4 Trader Rating: (17)	Re: NEED HELP ASAP building heads.... woah wain now im confised...when i typed my last post your picture did not show up for me, and somebody told me that the sensor was on the intake cam.... i thought it was on the exhaust cam. but all i know for shure is that the cam that has the sensor on it is marked with a "N" some body who knows please chime in and tell me the answer to the following... On a 93 Vr4 is the cam sensor on the intake or exhaust cam? also dose it really matter if i bolt the cam caps down ontop of the seals rather than pushing them in after.... because i do not have the special tool for that. __________________ Currently being installed: New shortblock (ross pistons, forged crank, shotpeened rods) , Stage 3 Ported and polished heads (w/ 3rd gen lifters, dual hi-rev springs, and titanium retainers), TEC 15Gs, Ebay Manifolds, 3sx crank pulley, Denso Iridium plugs, MSD 8.5mm wires, EvoVIII 560cc injectors, Walbro 255lph fuel pump w/ hotwire kit, Apexi SAFC II black edition, Dejon intake tubes, K&N FPIK, Greedy Type-S, ATR Turboback exhaust, SPEC Stage 3+ clutch, RPS flywheel, Dual Core FMIC, DN y-pipe, Maximal Solids