3000GT/Stealth International Message Center - View Single Post - Emange Ultimate 2 step and no lift shif??

Gray Haze · 05-11-2008, 02:39 PM

Get a stereo cable, cut the end off one end, hook it up to a clutch switch. Needs to have the contacts closed when pedal is down, open when pedal is up. Plug it into the switch input on the EMU.

Goto IGN tab on car setup
start RPM = rpm u want to launch at
ign cut rpm = rpm you wish to have the rev limiter at
ign adj set to -5 to -15
check adj box on start rpm

done.

05-11-2008, 02:39 PM	#2 (permalink)
Gray Haze Master Of Disaster Join Date: Mar 2002 Location: Fort Worth, Texas Drives: 3S's Since Feb 2002. Trader Rating: (25)	Re: Emange Ultimate 2 step and no lift shif?? Get a stereo cable, cut the end off one end, hook it up to a clutch switch. Needs to have the contacts closed when pedal is down, open when pedal is up. Plug it into the switch input on the EMU. Goto IGN tab on car setup start RPM = rpm u want to launch at ign cut rpm = rpm you wish to have the rev limiter at ign adj set to -5 to -15 check adj box on start rpm done. __________________ 1992 3000GT VR-4 #15 of 24. The ORIGINAL Sandstone Gray '99 Conversion. A slow strangle with your feet on the floor. www.3stech.org - Now with 100% less invite codes! Free Registration!