I know there are people here who don't frequent the FullThrottleTech.com board. So I'll post this here as well, for everyone’s use:
Quote:
*You need Microsoft Excel for this utility to work*
Ok guys, I've updated the VE MAP Utility program. Now you can use your custom User-Defined Axis VE Map!
This utility allows you to input your current user tune (hi,mid,low and tune points) along with the VE map that you are currently using to produce a 'corrected' VE Map. This allows you to zero out your user tune, will help gain familiarity with the VE Map and how your user tune effects it..
The utility has three pages: VE Data is the working sheet where you input your current User Tunes & VE MAP, and receive a modified VE MAP. VE MAP is the 3-D visual of the 'corrected VE Map'. Read Me is a quick 'how-to'.
Also, the VE Table will highlight any changes inputted by the User Tunes. And finally, the VE Table will warn (via going to red) if your VE gets too high. This is important because the T-Pro will accept a max of 127 for VE. If you need to go higher then 127, I suggest leaning out the whole map via a % then adding that same % to the mainscale.
This should work fine, however as with any normal tuning keep a watchful eye on your AFRs.
BTW - Make sure you have Macros enabled. This is necessary for the utility to work correctly.
Let me know what you guys think.
Rogue
|
And here is the thread:
FTT VE MAP Utility Thread
The utility file is posted on that thread, as its too large to attach here (only 140k file).
-Rogue