Re: Automatic drag car
We used a JDM ATX AWD Transaxle.
The OEM clutch packs are probably beefy enough for anyone here.
The Torque convertor should get redone at Hughes out in AZ. They are the bomb.
Get a shift kit.
We kept snapping the input shaft when shifting into 4th.
But we were running around 800-900 AWHP at that time.
I think anyone else in a normal setup would be fine.
__________________
AEM Factory Trained Tuner
91VR4-3.0L-Stock heads and Cams-762AWHP 747AWTQ 30psi E100 Daily Driver 10.63@121mph
SLTT-10.9 @ 140MPH Stock NA motor and NA heads/Cams
T4 AWD 9.21 @ 154.98
T2 FWD 10.19 @ 140.31
T4-159.23 MPH Ran on 6G72 3.1L!
T4-995AWHP Uncorrected 6G72 3.0L C16
T2-820FWHP 3.1L 27psi C16
91VR4 Red-17Gs w/supporting mods-sold
93SLTT/T2
91VR4 Pearl White-sold
91VR4 Black-sold
92VR4 Sandstone-sold
94VR4 Green-sold
93VR4 Pearl White-sold
NG09 Title Sponsor
3SX Performance
3SX Performance Service Email
|