Quote:
Originally Posted by gltasn
make sure you prime your turbos before you start them. i noticed your oil line installed allready. i would remove and add oil. it will take an hour but it will start to go into turbo and you can add more. do this 3 times before starting. i even took a tube(heater hose) and put one end around oil inlet and blew into hose to force oil into turbo. if you dont you could seize turbo upon start. j sin
|
I did pre oil my turbos. By the time the engine is primed there will be plenty of lubrication throughout the system.
I always pull my crank and cam angle sensor harness so there is no spark / fuel during the priming stage, pretty much the same thing.