I have a SOHC 24v 6g72 motor
ok, i was at the dragstrip last friday and i blew the oil pressure sender out of the filter mount. I was running close to 100psi pressure at 6000rpms. i thought i shut it down fast enough, but apparently i didnt. My lifters are a bit louder (after quieting down from new oil) than before and i have a clunk from the pully side of the bottom end. i cant tell if its a rod bearing or main bearing thats gone because it seems to go away when you rev the motor. anyone have any ideas?
Blowout
Clunk
