Quote:
Originally Posted by stealth-TwnTrbo
On my logs i am seeing knock voltage about 0.5 volts what is severe knock or to much knock?? I was told real knock was only over 1.5 or high anything less than that on the AEM is just noise, does anybody know what real knock is based on voltage on the AEM.
|
Typically the 3s displays under 1.5V's of knock threshold voltage.
However any sharp spikes or inclines could be real knock. What is the current state of your tune? How much boost and ignition timing? What is your pick/delay comp and ignition sync at?
The knock voltage and knock raw #1 should ramp up with a steady increase in rpm.
__________________
-Josh
mildly modified blue 93 rt/tt-SOLD
3780lbs, pump gas 3/s. 127.08mph-92 octane.
I still tune cars!
new project, T.B.A