Quote:
Originally Posted by Apache
His problem wouldn't be from the cables since his is an actual 6-speed, not a conversion from a 5-speed. It's something inside the tranny itself since when I had this problem dropping in a new tranny cured it immediately.
|
It doesn't matter If it's a 6 speed conversion. When you do a 6sp conversion you have to use a 6sp trans, transfercase, driveshaft, rear end and linkage. So you end up with a 6sp car just like it came from the factory. On my car the linkage was fine in the original car but they somehow wouldn't work when I installed them. I could force on the shifter and linkage and it wouldn't move into reverse. When I disconnected the linkage and the shifter stillwouldn't go in reverse Iknew it wasn't in the trans.