Quote:
Originally Posted by 1997GTX
^^^ Thanks, but i've asked all of them and no luck on any part 
I guess i'm just unlucky.
However, another member PMd me to say he has a used 3rd gear slider, so that's off the list. On to just the 2nd gear parts now!
--Adam |
I don't know why they told you that. I held them in my hand a few days ago. I think we were down to our last 1/2 synchro set, but we had a couple of the 1/2 hub and sleeve assemblys left. PM me your phone number and I'll have them call you if we have them.
Quote:
Originally Posted by Toni
The bearing isn't even 25mm ID both bearings I have two from separate cases they are 29.9mm ID. All of the 6405c3s say 25mm. Where did this even come from?
Also they say 574976, the 6 is hard to read but it's there.
Where can I get the correct bearing new?
-Antoni
|
We just ran into this same problem about a week ago. I KNOW I saw that number in a tranny. It was an old abused tranny that Kormex had rebuilt year ago. So I thought they have found it. But perhaps they are take these bearings and machining them to fit? Give Kormex a call and see what they say and if they have any for sale. I'll do the same. We put in an order from Japan for the OEM ones. We do currently have several of these OEM bearings in stock, used, but it great shape. If you are interested then give us a call. I will be at the shop almost all day this Friday. I will also update that bearing info on the first page.
__________________
When asked what the best thing to come out of Italy is, most Italians will tell you Ferrari.... But if you ask me it was Super Mario Brothers. 
250 RWHP
If you want the exploded views of both 5 and 6 speeds or pics e-mail me at
SavagTiger@AOL.com.
94 VR-4 Panama Green Tan Interior
RPS II, gutted cats, flipped BPV, 3SX control arms, 3SX shift bushings, Red Line, Auto-Meter. Rebuilt TC, transaxle, steering rack, heads, and turbos. 360cc's blue printened with in 1%. New short block. RWD convertion and welded rear end.