Re: 13G vs. 13C Turbos
Scanned through that thread again and it turns out Fastoldguy's setup isn't exactly stock heads and cams. He has 1mm oversized valves, 8.5:1 pistons, and clipped 13g's and it was 410 AWHP and 429 lb/ft of torque.
__________________
His - Red 93 RT/tt
Mods: Hallman's MBC @ 16 psi, turbo XS type H BOV, stillen dp, custom exhaust, Spec stage 2 clutch, RPS FW, 3sx lightweight crank pulley, BCP7RES-11 @ .030 gap, autometer gauges, slightly gutted mas, dsm SMIC's, ACPT 1 piece CFDS, Tein S springs, pte 580 inj's, safc neo/SITC, 13t's, hotwired walbro, maximal performance solid motor mounts, DR plenum spacer.
Hers - BPU Green 94 vr4
|