Re: Rebuilding trans-Input on 3rd gear? Pics inside
Yes, the parts 3SX sells for the Getrag are OEM Mitsu/Getrag Straight from Japan. No chinese transaxle parts.
Personally, I would change that gear out. It will cause engagment problems.
Both the dogs on the gear and teeth on the slider need to be sharp/to a point in order for the gear to engage quickly and smoothly without grind. If they are flattened/chipped you will not have smooth engagement.
__________________
AEM Factory Trained Tuner
91VR4-3.0L-Stock heads and Cams-762AWHP 747AWTQ 30psi E100 Daily Driver 10.63@121mph
SLTT-10.9 @ 140MPH Stock NA motor and NA heads/Cams
T4 AWD 9.21 @ 154.98
T2 FWD 10.19 @ 140.31
T4-159.23 MPH Ran on 6G72 3.1L!
T4-995AWHP Uncorrected 6G72 3.0L C16
T2-820FWHP 3.1L 27psi C16
91VR4 Red-17Gs w/supporting mods-sold
93SLTT/T2
91VR4 Pearl White-sold
91VR4 Black-sold
92VR4 Sandstone-sold
94VR4 Green-sold
93VR4 Pearl White-sold
NG09 Title Sponsor
3SX Performance
3SX Performance Service Email
|