04-22-2008, 10:20 PM
|
#2761 (permalink)
|
|
Verified Seller
Join Date: Jul 2007
Location: stoughton
Drives: with MR gears
|
Re: ---===The Official MAFT-Pro Thread===---
so i finally installed my maf-pro and im upset. ok first off. i installed everything per the wiring manual i got off maftpro.com. they are all good connections because i did them myself with soilder and i've re checked them 10times over. even gave them a tug a few times.
my problem.
1.it says my air temp is -40 constant.
2.im pretty sure im in open loop to.
3. i have a CEL on for MAF sensor. ( i think its code 51)
4. after driving for about 30 min all my fuel trims stayed 100%.
5. they onlyway to get my car running normal is to have my main scale at +24
i first uploaded Bobs 13G bin and changed the mainscale. then that ran like crap. so then i started from scratch and it still runs like crap.
is the above list of problems a common problem? have any advice for me on maybe what to look into? my mods are in my sig.
thanks guys
-Chris
__________________
 94 VR4
99 conversion with 6K HIDs and PIAA fogs, 17G/15G combo, FMIC, DN downpipe, 560cc, walbro 255lph hotwired, MR gears, RPS 6-puck clutch, fidanza flywheel, hybrid logger, dejon preturbo, MAFT pro. K&N and custon carbon fiber heat sheild, HKS ssq, blitz turbo timer, 18" TSW kyalamis wraped in proxy 4's, polished Y-pipe, polished strut bar,solid engine mounts, seattle short throw, vac line reduction, misc REAL carbon fiber trim and misc gauges..ect |
|
|