3000GT/Stealth International Message Center - View Single Post - ---===The Official MAFT-Pro Thread===---

Yes, for now I still have my ITC installed for timing control. Need to get the main functions of the Pro working before I add bells and whistles like timing and boost control thru the Pro.

__________________

'92 Stealth RT/TT, Sandstorm, 125K miles
Currently installed: E-MBC, SS brake lines, Motul 600 BF, FN01R-C rims, ATR DP, test pipe, and exhaust, EK2Mfg EGR blockoff plates, MAFT-Pro, S-ITC, Dejon Tool intake runners, JIC FTL-A2 struts, PST CFDS, Tial BOV, MSD 8.5mm plug wires, Accelerated Motorsports catch can, Ebay FMIC, Evo 560's, IPO dual feed fuel lines, Greddy P/W/H EGT gauge, IPO battery relocation, Optima red top, PWR radiator, DSM shifter bushings, custom WW fluid tank, Saner F/R swaybars, PLX WB O2 setup, SCE StopTech ST-40 332x33 front brake upgrade & 300mm rear rotors, SCE tender springs, SCE caster/camber plates, Titan Bending f header, 15G turbos,forged crank, Crower rods, Weisco pistons, DR Stage 2 heads, TRS seats, 5 pnt harnesses.

04-22-2008, 06:32 PM	#2760 (permalink)
Storm Strike Forum Member Join Date: May 2002 Location: PA Trader Rating: (8)	Re: ---===The Official MAFT-Pro Thread===--- Yes, for now I still have my ITC installed for timing control. Need to get the main functions of the Pro working before I add bells and whistles like timing and boost control thru the Pro. __________________ '92 Stealth RT/TT, Sandstorm, 125K miles Currently installed: E-MBC, SS brake lines, Motul 600 BF, FN01R-C rims, ATR DP, test pipe, and exhaust, EK2Mfg EGR blockoff plates, MAFT-Pro, S-ITC, Dejon Tool intake runners, JIC FTL-A2 struts, PST CFDS, Tial BOV, MSD 8.5mm plug wires, Accelerated Motorsports catch can, Ebay FMIC, Evo 560's, IPO dual feed fuel lines, Greddy P/W/H EGT gauge, IPO battery relocation, Optima red top, PWR radiator, DSM shifter bushings, custom WW fluid tank, Saner F/R swaybars, PLX WB O2 setup, SCE StopTech ST-40 332x33 front brake upgrade & 300mm rear rotors, SCE tender springs, SCE caster/camber plates, Titan Bending f header, 15G turbos,forged crank, Crower rods, Weisco pistons, DR Stage 2 heads, TRS seats, 5 pnt harnesses.