3000GT/Stealth International Message Center - View Single Post - Need Tranny rebuild/ 93 VR4- Experience with Jack's?

Colt45_GTO · 04-21-2008, 02:47 PM

this is intersting, i'm currently refurbing my 5spd. my 3rd is grinding going into gear so it has to be the synchro. it has the crappy brass synchro's in there and the case is a little beat up, ie filler and drain plugs have been butchered in the past and on draining the oil there was less than a cup full.

tomorrow i have to get the shafts pressed. i'm using used parts off another core that has lost 2 gears but 3rd synchro is fine and made of real metal. so i'll be replacing all the brass synchro's. is there anything to look out for and whats the preload specs?

04-21-2008, 02:47 PM	#43 (permalink)
Colt45_GTO GTONW is good to go Join Date: Nov 2004 Location: manchester uk Drives: Black '91 TT Trader Rating: (0)	Re: Need Tranny rebuild/ 93 VR4- Experience with Jack's? this is intersting, i'm currently refurbing my 5spd. my 3rd is grinding going into gear so it has to be the synchro. it has the crappy brass synchro's in there and the case is a little beat up, ie filler and drain plugs have been butchered in the past and on draining the oil there was less than a cup full. tomorrow i have to get the shafts pressed. i'm using used parts off another core that has lost 2 gears but 3rd synchro is fine and made of real metal. so i'll be replacing all the brass synchro's. is there anything to look out for and whats the preload specs? __________________ Colt45_GTO Semper Fidelis go register at www.gtonw.co.uk