3000GT/Stealth International Message Center - View Single Post

driver17 · 04-16-2008, 09:02 AM

Today I am going to try to back my clutch out even farther. I called Kormex and they said it sounds like the clutch is hanging. On the adjustment for the engagement there are only a few threads left to come up. I dont think thats going to help. Are there any other adjustments for the clutch other than engagement on the bracket under the dash?

The shifter cables when popped off the posts they line up exactly with the holes. (Thats how I was told to 'align the cables').

I do have a stainless line that needs to be installed that didn't arrive in time to go in with all my other parts. Should I try installing that, and then bleeding the clutch and see where I'm at?

I'm just so frustrated spending that kind of cash and not seeing an improvement!!! Any ideas?

04-16-2008, 09:02 AM	#3 (permalink)
driver17 Forum Member Join Date: Nov 2007 Location: WI Drives: 92 VR4 Trader Rating: (7)	Re: Kormex Tranny Issues !!! Today I am going to try to back my clutch out even farther. I called Kormex and they said it sounds like the clutch is hanging. On the adjustment for the engagement there are only a few threads left to come up. I dont think thats going to help. Are there any other adjustments for the clutch other than engagement on the bracket under the dash? The shifter cables when popped off the posts they line up exactly with the holes. (Thats how I was told to 'align the cables'). I do have a stainless line that needs to be installed that didn't arrive in time to go in with all my other parts. Should I try installing that, and then bleeding the clutch and see where I'm at? I'm just so frustrated spending that kind of cash and not seeing an improvement!!! Any ideas?