Quote:
Originally Posted by defgh1
At this point I would pull the motor. You are going to need a complete rebuild.
Doug H
|
The scored bearing might not be a huge problem if the crank is undammaged. The bearings would obviously need replacing though.
As for the metal (piston?) in the pan, it is conceivable that this is just casting fragments that have broken free. Given the damage to the valves, I'd say that is highly unlikely though. Your valves probably took a chunk out of one or more of your pistons. At this point, I think your best bet is to break the engine down, throroughly inspect all of the damage, and probably do a complete rebuild. Sorry for the bad news.
