[lDoomZdaYl]

hey bro i just did mine if you have a torque ranch with all the right sockets,hammer, you should be fine. take off the break claiper the rotor than unscrew the 2 little bolts. Once you get done all of that unscrew the lower ball joint bolt unscrew the top 2 bolts where the shocks are being held. speed speed sensor, and on the left or the right unscrew the little bolt that looks like it has cutouts in it take of the whole piece take a wood piece and blace it on the end of the axccel and bang it untill it comes off now this is where you get to decide what you want to do either bang the the bearing out yourself which is what i did. And if you do please save yourself some time take that whole piece that you took of to a shop get them to press the bearing in for you it only cost me 20dollars trust me way easier and safer.

Sorry if this is a bit confusing anyone alse if i forgot anything please correct me Thanks Alex