[Jman649916]

The stealth316 60k page only gives info assuming it was in time before you removed the original timing belt. There are some marks on the camshaft sprockets, (I think 2 each) and there are what look like alignment notches on the valve covers, and there is a TDC angle marking on the timing belt cover for the crankshaft pulley, but where does it all come together? The camshaft sprockets will only hold in place in one of 3 places each and the crankshaft will stop pretty much anywhere, and it doesn't appear that any of the marks on the rear sprockets line up with the notches on the valve covers, so I'm assuming that when one side lines up, the other side is in an intermediary positon, but since the steatlh316 page says that the sprockets will stay in place when the belt comes off, then I must be messed up somewhere. Anyone have any other links or suggestions? Or if you can recommend where to get a downloadable factory service manual before Friday, it should be able to tell me what I need to know. Thanks for the current and future help guys.