Intake temperature?
I have seen some mention in threads involving aftermarket hoods but no real discussion across the board as to the intake temperatures you all have seen and under what conditions.
I hooked up my scanmaster 3 today so I was playing with the features and one is a realtime of the temp from you MAS. The high today was 52 and at idle and low cruise I saw temps as high as 134. When cruising at 65/70 as the car began to get some fresh air through it came down to 91-95.
Over the next week or so I will have more numbers but I wanted to see the intake temps others are and have seen and under what conditions (area, aftermarket hood, cold air wall, cold air intake, FMIC, SMIC).
For me with a stock 1st gen hood (3 holes cut in the stock blisters), rear rubber seal removed, and DSM SMIC's, I saw the above.
130-135 at idle (roughly 80 degrees above ambient)
90-95 at cruise (roughly 45ish above ambient).
__________________
His - Red 93 RT/tt
Mods: Hallman's MBC @ 16 psi psi, turbo XS type H BOV, stillen dp, custom exhaust, Spec stage 2 clutch, RPS FW, 3sx lightweight crank pulley, BCP7RES-11 @ .030 gap, autometer gauges, slightly gutted mas, dsm SMIC's, ACPT 1 piece CFDS, Tein S springs, pte 580 inj's, safc neo/SITC, 13t's, hotwired walbro, maximal performance solid motor mounts, DR plenum spacer.
Hers - BPU Green 94 vr4
|